Single rope technique devices: what is classed as an ascender, a descender or a work positioning device
The tree codes and standards bodies sort rope devices by what they do: ascenders grip, descenders brake, and EN 12841 adds types for work ropes. Definitions come from the UK, New South Wales and New Zealand codes, BSI, the UIAA and a maker notice.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
The named codes and training bodies are described here as published. It is not training and does not teach the work. The use of the techniques is covered in the guide to climbing systems compared.
The technique terms
The Industry Code of Practice for Arboriculture, Tree Work at Height (Edition 2, May 2020), defines stationary rope technique (SRT) as one where the rope remains stationary in relation to the user and harness while the system is in use. It defines moving rope technique (MRT) as one where the rope moves in relation to the user and harness.
The New Zealand Arboricultural Association guide, Edition 3.1 of 2022, gives SRT two headings, SRT access and SRT work positioning. It says some techniques and equipment used for SRT access may not be compatible with SRT work positioning, so the two need to be considered separately. Its description of SRT work positioning is a single line providing a primary means of support and restraint, with systems that allow lateral movement and non-vertical loading.
Definitions by device class
| Class | Definition as the document gives it |
|---|---|
| Ascender | UK industry code: a mechanical device used for ascending a rope which slides when advanced up a rope but grips when loaded in the opposite direction. NSW code: a knot or mechanical device used for ascending a rope and positioning the climber in the tree. NZ code of practice: a mechanical device that will slide upwards on a rope but will grip when pulled in the opposite direction. |
| Descender | NSW code: a knot or mechanical friction device used with a rope to enable descent from a tree in a safe and controlled manner. |
| Friction device (NZ code of practice) | A device of alloy or metal that controls friction on a line. Used to secure a climber to the climbing line, it permits controlled ascent, descent and work positioning. It is stamped or marked to the appropriate standard and rated to a minimum of 22 kN. |
| Work positioning device | The NSW code defines a work positioning harness as a body belt and buttock strap used as a work positioning device where only a restrained fall is likely. The UK code lists BS EN 358 for belts and lanyards for work positioning or restraint. |
Standards by device
| Device | Standard in the UK code's Part 6 list |
|---|---|
| Rope clamps, the mountaineering ascender | BS EN 567, Mountaineering equipment, rope clamps (UIAA lists rope clamps as standard 126) |
| Rope adjustment devices for rope access systems | BS EN 12841 |
| Descender devices for rescue | BS EN 341 |
| Descending devices | ISO 22159 |
| Braking devices with manually assisted locking | EN 15151, Mountaineering equipment (UIAA lists braking devices as standard 129) |
EN 12841 types in a maker notice
BSI records BS EN 12841:2024 as published March 31, 2024 and current, under review, with the title Personal fall protection equipment, rope access systems, rope adjustment devices. A maker technical notice for a rope clamp gives two certifications for it: an ascender for mountaineering and climbing under EN 567:2013, and an ascending device for the work rope under EN 12841:2024 type B. The same notice says type B (ascender) and type C (descender) devices are designed for progression on a work rope. It says they should be used with a fall-arrest system (type A), unless an analysis has shown that another configuration is preferable.
Section 4.6 of the NSW code
Section 4.6 of the SafeWork NSW Tree works code of practice (March 2026), on mechanical ascenders, descenders and rope grabs, lists points to consider. Devices should be compatible with the rope specifications in the system, including recommended rope diameters. They should be self-locking or used with another self-locking device. Descent devices should have an automatic braking function that activates when the operator removes the control hand. For mechanical ascenders, the code says consideration should be given to a backup secondary attachment on the main climbing line in case of mechanical failure.
Sources
- Arboricultural Association and partners, Industry Code of Practice for Arboriculture: Tree Work at Height, Edition 2, May 2020, glossary and Part 6, read October 16, 2026
- SafeWork NSW, Tree works code of practice, March 2026, section 4.6 and glossary, read October 16, 2026
- BSI Knowledge, BS EN 12841:2024 Personal fall protection equipment. Rope access systems. Rope adjustment devices, read October 16, 2026
- Maker technical notice for a rope clamp, reference B0004700G, read October 16, 2026
- UIAA, Safety Standards, list of UIAA standards, read October 16, 2026
- WorkSafe New Zealand, Approved Code of Practice for Safety and Health in Arboriculture, November 2012, glossary, read October 16, 2026
- New Zealand Arboricultural Association, Best Practice Guide for Safety Requirements in New Zealand Arboricultural Operations, Edition 3.1, 2022, sections 35 to 38, read October 16, 2026