ArbNation Join free

Soil pH and tree nutrient availability: what extension describes

Soil pH changes which nutrients a tree can take up. Extension services in Florida, Mississippi, South Carolina, Utah and Iowa describe iron locked up in alkaline soil, lime as a slow fix for acid soil, and sulfur as a temporary fix for alkaline soil.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

Extension publications from the University of Florida (UF/IFAS), Mississippi State, Clemson, Utah State and Iowa State describe soil pH in landscapes. pH is a scale from 0 to 14. Seven is neutral, lower values are acidic and higher values are alkaline.

What pH does to nutrients

UF/IFAS publication SL 256 says pH works through the chemical form of soil elements and through soil microbes. In acidic soils the supply of potassium, calcium and magnesium drops while aluminum, iron and zinc become more available, and possibly toxic. In alkaline soils iron, manganese, zinc and boron are commonly deficient.

Clemson's HGIC 1650 gives the same pattern. In highly acidic soils aluminum and manganese become more available and more toxic, and calcium, phosphorus and magnesium less so. Above pH 6.5, phosphorus and most micronutrients become less available. Mississippi State's P2831 puts macronutrients at their most available between pH 6.5 and 8.0, micronutrients mostly in acidic soils, and says pH 6.5 seems ideal for availability.

Ranges the publications print

pH figures for landscape plants
PublicationFigure
UF/IFAS SL 256Pittosporum, viburnum, oak and pine grow well in acidic to moderately alkaline soil. Between pH 5.5 and 7.0 there is no need to adjust. Azalea, blueberry and gardenia do not grow well above pH 5.5. Florida's median soil pH is 6.1
Mississippi State P2831Most ornamentals grow well between pH 5.8 and 7.0. Azaleas, gardenias and camellias are strongly acid-loving. Mississippi soils range from pH 4.0 to 8.0, mostly acidic
Clemson HGIC 1650Most ornamentals do best at pH 5.8 to 6.5. Acid-loving plants, including azaleas, rhododendrons, blueberries and conifers, do best at 5.0 to 5.5. South Carolina soils are usually 4.5 to 6.0
Utah State, iron chlorosisIron chlorosis usually appears in soils above pH 7.0, and a soil test checks whether pH is above 7.0 to 7.5
Iowa State, pin oak chlorosisPin oak develops iron chlorosis when planted in soil above pH 7.5

The publications differ on the preferred range. None gives one target for every tree.

Alkaline soil and iron chlorosis

Iowa State explains that the soil usually holds plenty of iron, but high pH stops the plant from absorbing it. Cold soil, wet soil, a lot of copper, manganese or zinc, or too much phosphorus make it worse. Leaves turn yellow with dark green veins, then may develop angular brown spots and curled brown edges. After several years of chlorosis, twigs and branches can die. Iowa State names pin oak, silver maple, bald cypress, crabapple and sweetgum as susceptible. It adds that chlorosis is often worst where topsoil was stripped and clay subsoil exposed, as on new housing developments.

Utah State names silver maple and quaking aspen as popular trees with serious chlorosis in high-pH soils. Norway maple and Scots pine can also show it on bad sites, and the problem tends to worsen as irrigation builds up carbonates. Utah State adds that saturated soil, compaction, plastic sheeting as mulch and high soil phosphorus can all worsen it. A related page covers iron chlorosis in trees.

Raising pH: lime

Lime raises pH in acid soil. UF/IFAS and Clemson say a soil test with a lime requirement should come first, because the amount depends on how strongly the soil resists change. Clay and high organic matter soils resist change more than sandy soils, so they need more lime.

  • UF/IFAS: lime works best mixed into the top 6 to 8 inches. On established landscapes, surface application and watering in is the alternative, and rates over 25 lb per 1,000 sq ft are split over 3 to 4 weeks.
  • Mississippi State: finer lime acts faster. Hydrated lime can damage plants. Where no test is available, 5 lb per 100 sq ft may change pH by 0.5 to 1.0 unit. Applying 2 to 3 months before planting gives the best result.

Lowering pH: sulfur and its limits

UF/IFAS and Mississippi State both say lowering the pH of alkaline soil is far harder than raising acid soil, and in soils formed from limestone, marl or buried concrete it is nearly or wholly impossible to do permanently. Elemental sulfur lowers pH only temporarily: soil bacteria turn it into sulfuric acid, and pH rises again once the sulfur is used up. Mississippi State puts the limit at 2 lb sulfur per 100 sq ft a year, split into half-pound doses every three months. UF/IFAS adds that if pH is within 0.5 of the ideal range, adjusting will probably not improve plant performance. Both recommend choosing plants suited to the soil's natural pH.

Utah State describes a localized treatment for chlorotic trees: equal parts ferrous sulfate and elemental sulfur placed in holes 12 to 18 inches deep inside the drip line. It reports one treatment may last 2 to 4 years. Foliar sprays give a rapid but incomplete response, and soil chelates last about a year. Only chelates containing FeEDDHA work well in high-pH soil; all other chelates are ineffective above pH 7.2. For the testing side, see the guide to soil testing for trees, and for the broader liming question the guide to liming and acidifying around trees.

Sources