ArbNation Join free

Standards withdrawn or superseded in climbing gear: EN 813, EN 12841 and EN 795

Three climbing gear standards changed edition: EN 813 for sit harnesses in 2024, EN 12841 for rope adjustment devices in 2024, and EN 795 for anchor devices in 2012. The catalogue dates and scopes are below.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. BSI and EVS each list these standards in their catalogues.

Sit harnesses: EN 813

BSI lists BS EN 813:2008, Personal fall protection equipment. Sit harnesses, as published on 30 September 2008 and withdrawn on 27 March 2024. EVS prints a different date for the same edition: withdrawn from 1 April 2024. EVS shows EVS-EN 813:2024 as the entry that follows and EVS-EN 813:1999 as the one before.

BSI gives the scope of the 2008 edition as requirements, testing, marking and manufacturer's information for sit harnesses used in restraint, work positioning and rope access systems where a low point of attachment is required. Sit harnesses are not suitable for fall arrest purposes.

Rope adjustment devices: EN 12841

EVS lists EVS-EN 12841:2006, dated 6 November 2006, as withdrawn from 1 March 2024. The EN 12841:2024 entry is valid from 1 March 2024. EVS also lists an amendment, EN 12841:2024/prA1, in its history.

BSI lists BS EN 12841:2024 as published on 31 March 2024, with the status "Current, Under Review". EVS gives the scope as rope adjustment devices intended for use in rope access systems, with requirements, test methods, marking and manufacturer's instructions. It ties the 2024 edition to Regulation (EU) 2016/425 on personal protective equipment.

Anchor devices: EN 795

BSI says BS EN 795:2012 supersedes EN 795:1996, which is withdrawn. EVS lists the older edition as EVS-EN 795:1999, with EN 795:1996 as its base document, withdrawn from 5 September 2012. The 2012 edition is valid from that date.

BSI records one change of wording: the classes A, B and C of the older edition became types A, B and C, a switch made to show the differences between anchor devices. The scope covers single-user anchor devices intended to be removable from the structure, with stationary or travelling anchor points.

BSI lists what the standard does not cover:

  • anchor devices that let more than one user attach at once;
  • anchor devices used in sport or recreation;
  • equipment made to EN 516 or EN 517;
  • parts of a structure installed for another use, such as beams and girders;
  • structural anchors.

EVS adds a warning under Regulation (EU) 2016/425. The 2012 publication does not concern types A, C and D, or any combination of them. For those types there is no presumption of conformity with the Regulation, because they are not considered PPE.

EN 795 types named in the EVS warning
TypeDescription in the EVS entry
AAnchor devices with one or more stationary anchor points and with the need for structural anchors or fixing elements to fix to the structure
CHorizontal flexible anchor lines
DHorizontal rigid anchor lines

The editions side by side

Edition dates as each catalogue prints them
StandardTitleDate and status
EN 813:2008Sit harnessesBSI: published 30 Sep 2008, withdrawn 27 Mar 2024. EVS: withdrawn from 1 Apr 2024
EN 813:2024Sit harnessesEVS: follows the 2008 edition
EN 12841:2006Rope adjustment devicesEVS: dated 6 Nov 2006, withdrawn from 1 Mar 2024
EN 12841:2024Rope adjustment devicesEVS: valid from 1 Mar 2024. BSI: published 31 Mar 2024, current, under review
EN 795:1996Anchor devices (older edition)BSI: withdrawn. EVS: withdrawn from 5 Sep 2012
EN 795:2012Anchor devicesEVS: valid from 5 Sep 2012. BSI: supersedes EN 795:1996

Harness, rope and connector standards sit in the guide to climbing gear standards by item, and the 12841 device categories have their own guide.

Sources