Stump grinder injuries and caught-in deaths: reports and regulator warnings
A California FACE report and a WorkSafeBC summary describe two workers drawn into a rotating stump grinder wheel, one by a rope and one on foot. OSHA's machine guarding rule covers rotating parts.
Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.
The named codes and training bodies are described here as published. It is not training and does not teach the work. The two cases below come from the agencies' own write-ups. No victim is named.
A rope and the cutting wheel: California FACE report 18CA002
The California Department of Public Health's FACE program investigated a death on April 9, 2018. A laborer helped a landscaping company owner, who ran a stump grinder, by pulling on a rope tied around his waist. The other end was attached to an eye hook on the machine's disc guard. The rope caught in the grinding wheel and pulled him in. He died the next day.
The report describes a stump grinder as a power tool that removes stumps with a rotating grinding wheel with carbon steel teeth. Machines range from the size of a lawn mower to as large as a truck. Hydraulic cylinders move the wheel sideways and up and down through the stump.
It records these facts about the business:
- No written injury and illness prevention program or other required safety documents.
- No formal stump grinder training for the owner or the laborer, only brief general instructions from rental companies.
- The rental manager did not ask about the owner's knowledge of the machine, and the owner was not given the instruction manual.
- The maker's manual warns against allowing additional workers within 75 feet during grinding.
The report's recommendations
The investigators give two recommendations. The first is that stump grinder operators are trained in stump removal and in the machine in use, and follow safety policies. The second is that homeowners hire only landscapers certified by bodies such as the Tree Care Industry Association or the International Society of Arboriculture.
Under the first, the report lists precautions for operators:
- Check for debris and buried objects, with the machine stable.
- Good footing and a clear path out of the work area.
- On a slope, the machine and operator below the stump on the downhill side, and steep slopes avoided.
- A barrier to repel debris from the cutting action, when possible.
- Only the operator present, with no one within 75 feet.
- No modification of the machine.
The report adds that ropes or chains should never be attached to a grinder while it runs. An eye hook or other attachment point is for moving the machine when it is off. Its reference list names California General Industry Safety Orders sections 3421, 3427 and 3428, the last on stump cutters, and a TCIA Stump Grinder Reminder.
On foot in front of the wheel: a WorkSafeBC summary
In February 2022 a worker at a residential property was grinding a stump with a gas-powered cutting wheel. He walked in front of the machine to remove a rock from the wheel's path, slipped and was drawn into the rotating wheel. He was seriously injured. The employer was a tree services company.
WorkSafeBC gives the cause as a grinder that was not de-energized. Engine speed was reduced, but the gearing was not disengaged, so power still reached the wheel.
It names a contributing factor: an older model without updated safety features. That machine let the operator step away from the controls with the wheel engaged and turning. WorkSafeBC says newer models from the same maker have an operator presence system, which stops the wheel when the operator releases the controls.
OSHA machine guarding
OSHA's 29 CFR 1910.212(a)(1) says one or more methods of machine guarding protect the operator and other employees from hazards such as point of operation, ingoing nip points, rotating parts and flying chips. Examples include barrier guards, two-hand tripping devices and electronic safety devices. Paragraph (a)(2) says guards are affixed to the machine where possible and do not offer an accident hazard themselves.
| Case or rule | Hazard named | Control named |
|---|---|---|
| California 18CA002 | Rope caught by the grinding wheel | No ropes or chains on a running grinder; operator training; 75 feet clear |
| WorkSafeBC, February 2022 | Wheel still turning with gearing engaged | De-energized machine; operator presence system on newer models |
| OSHA 1910.212 | Rotating parts, flying chips | Guards fixed to the machine |
The California case has its own page, report 18CA002. Chipper and grinder rules are compared in chippers and stump grinders.
To correct or remove an entry, write to the address at the foot of this page.
Sources
- California Department of Public Health, CA/FACE, Laborer dies when he is pulled into a tree stump grinder, report 18CA002, March 25, 2019, read October 19, 2026
- WorkSafeBC, Incident investigation report summary: Worker contacted rotating cutting wheel of stump grinder, notice of incident 2022166950005, published April 2025, read October 19, 2026
- US Department of Labor, OSHA, 29 CFR 1910.212 General requirements for all machines, read October 19, 2026