ArbNation Join free

Terrestrial and airborne LiDAR for tree structure and failure screening

Three studies used laser scanning on urban and roadside trees: a Connecticut trimming and sway pilot, a Michigan woody surface area study and a Hong Kong health survey of more than 700 trees.

Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.

Three published studies applied laser scanning to trees: terrestrial laser scanning (TLS) in all three, and in one of them also handheld and airborne laser scanning (ALS). For LiDAR in vegetation management at corridor scale, see LiDAR and remote sensing for tree work.

Crown structure and sway, Connecticut

A 2024 pilot in Arboriculture and Urban Forestry, by Cranmer and colleagues, scanned 24 roadside trees at 3 sites near the University of Connecticut at Storrs. Fifteen trees were trimmed in March 2023 and 9 were controls. Two utility trimming treatments were used, Enhanced Tree Trimming and Scheduled Maintenance Trimming.

TLS scans were taken leaf-off, before and after trimming, from four positions around each tree. They gave crown asymmetry, crown area, total volume, crown diameter to height ratio and crown evenness. Accelerometers placed 7 to 10 m up each stem logged tilt at 10 Hz, from which the authors derived sway frequency and displacement.

  • Crown structure: the results illustrated the effects of common trimming practices on crown structure.
  • Movement: there were no consistent changes to tree movement directly after trimming across the 24 trees.
  • Wind: changes in crown structure through trimming affected displacement in moderate wind conditions.
  • Frequency: there were no significant differences between frequencies across treatment types.

The authors call it a pilot that lays a foundation for understanding crown structure and biomechanics after roadside trimming. The paper names displacement after trimming as a key indicator of stability in wind. Its abstract says trimming alters branch and crown structure, which may be associated with tree failure and the likelihood of associated infrastructure damage.

Woody surface area, Michigan

Arseniou, MacFarlane and Seidel scanned 56 trees of three species on the Michigan State University campus: honey locust, bur oak and dawn redwood. They built quantitative structural models from the scans (Remote Sensing, 2021). Total woody surface area increased with a box-dimension metric of structural complexity, and correlated most strongly with the 25th percentile of path lengths from the tree base to every branch tip. The trees mainly allocated woody surface area to branches, and the branch-to-stem area ratio differed among species. Woody surface area also rose with crown surface area.

Tree health, Hong Kong

Nazeer and colleagues assessed more than 700 Old and Valuable Trees and Stone Wall Trees in Hong Kong. They combined TLS, handheld laser scanning, ALS and airborne multispectral data, and validated against in situ data from the government's Tree Management Office. Over 2017 to 2020 they found a decline in the health of some target trees, which they attribute to increased infestation and severe weather. They conclude that LiDAR data can extract different tree structural forms and help inform decisions on the health condition of urban trees. The abstract describes tree failure incidents as a motive and sets the conventional on-site assessment as time consuming.

The three studies
StudyTreesScanning
Connecticut roadside pilot, 202424TLS, leaf-off
Michigan campus, 202156 of three speciesTLS
Hong Kong, 2024More than 700TLS, handheld, ALS, multispectral

Sources