Tree protection plan drawings: what councils list as required on the plan
Bassetlaw, Leeds, Slough and two Sydney councils list what a tree protection plan must show: tree positions, root zones, barrier lines and ground protection. Leeds adds a dimensioned plan and a barrier post depth of 0.6 m.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
A tree protection plan is the drawing that shows which trees stay, which go and what keeps the building work off the ones that stay. The UK councils below name BS 5837:2012 as the standard behind it. The two Sydney councils name AS 4970:2025.
Where the plan sits in a UK application
Bassetlaw District Council lists the plan as one part of a larger tree package. The package starts with a schedule of the trees on the site, then a Tree Constraints Plan, then photographs and a pre-development tree works schedule. The Tree Protection Plan comes last. Bassetlaw says it shows trees to be retained, trees to be removed, the precise location and specification of physical barriers or fences, and ground protection measures.
Slough Borough Council puts the plan beside two other documents. A survey that follows BS 5837:2012 must include an Arboricultural Impact Assessment, an Arboricultural Method Statement and a Tree Protection Plan. Slough asks for a qualified arboriculturist with Professional Indemnity Insurance. Trees with a diameter above 75 mm that sit within influencing distance of the development are surveyed, and species, position and canopy spread go on the block plan. This applies to householder, minor and major applications.
Bassetlaw also says that too little tree information may leave an application invalid.
Items on the drawing, by UK council
| Item | Council | Wording in the council's own terms |
|---|---|---|
| Trees kept and trees removed | Bassetlaw | Shown on the Tree Protection Plan |
| Barrier location and specification | Bassetlaw, Leeds | Precise location of physical barriers or fences; Leeds shows a default barrier drawing |
| Ground protection | Bassetlaw | Ground protection measures shown with the barriers |
| Root protection areas | Bassetlaw, Leeds | Plotted as a circle centred on the stem base; Leeds accepts a polygon of equivalent area where rooting has occurred asymmetrically |
| Exclusion zone | Bassetlaw, Leeds | Bassetlaw treats root protection areas as an exclusion zone for any development activity; Leeds puts a construction exclusion zone notice on the barrier |
| Dimensions | Leeds | The Tree Protection Plan must be dimensioned |
| Site access and storage | Bassetlaw | Temporary access, haul routes, car parking, temporary structures, toilets and storage of materials |
| Services and drainage | Bassetlaw, Leeds | Bassetlaw lists drainage and services among potentially damaging operations; Leeds wants tree information on drainage and other engineering layouts |
| Construction space | Leeds | A default 5 m stand-off from canopies or root protection areas, the greater of the two, for scaffolding and platforms |
The Leeds default barrier
Leeds City Council prints a default tree protection barrier from BS 5837 in its guidance note. It calls this the standard for all situations unless a justified variation is agreed with the local planning authority. The drawing labels standard scaffold poles, heavy gauge 2 m tall galvanised tube with welded mesh infill panels, wire ties joining the panels to the uprights, scaffold clamps, and uprights driven in to a minimum depth of 0.6 m. An all-weather notice goes on the barrier.
Leeds considers an alternative specification where the site circumstances and the risk of damaging incursion into the root protection area do not necessitate the default. The alternative must be agreed with the local planning authority. Leeds says plans that show several barrier options with no justification, or no agreed location, will not be accepted.
The Leeds note also says that tree information, including root protection areas, tree names and ID numbers, goes on all the main layouts. It lists engineering layouts such as drainage. For protected new planting areas, Leeds names the same default barrier.
New South Wales: the plan and the specification
North Sydney Council splits the work into two documents. The Tree Protection Plan is a graphical site plan. It shows the tree protection zones of the retained trees, the location of the protection devices, and the trees to be removed or transplanted. The Tree Protection Specification is the written half. North Sydney lists protection fencing, ground protection, root protection methods, crown spread protection, monitoring, critical inspection stages and certification. The council adds that both documents are updated whenever the development plans change and shown on all amended plans.
The council's site plan items include a unique number for each tree, the Notional Root Zone, the Structural Root Zone and the Tree Protection Zone, each calculated under named sections of AS 4970:2025. It also sorts encroachment into the Notional Root Zone into bands. Minor is 10 percent or less and outside the Structural Root Zone. Moderate is above 10 and up to 20 percent and outside the Structural Root Zone. Major is above 20 percent or inside the Structural Root Zone. An arborist's report is required where works are proposed within five metres of a tree. The council accepts reports only from consultant arborists with an AQF Level 5 Diploma of Arboriculture or equivalent.
Inner West Council in Sydney prints a one-page checklist for the plan and specification. The checklist calls for the site address, the author's contact details and qualifications, and an inspection date no more than 12 months old. The site plan is drawn to scale with a north point. It shows trees to be retained or transplanted, and trees on neighbouring land if the work reaches their Notional Root Zone. An aerial image is not usually considered sufficient, though it may serve as a base plan.
The same checklist lists what the plan marks: Structural Root Zones and Notional Root Zones, fence locations, ground and trunk protection, and the measures tied to demolition, scaffolding, hoarding, excavation, piling rigs, cranes and tipper trucks. It also marks vehicle access routes, materials storage areas and works that the Project Arborist must supervise directly. The specification follows AS 4970:2025.
Where the lists differ
Bassetlaw, Leeds and Slough work from BS 5837:2012, and they reach for different details. Bassetlaw lists site logistics. Leeds lists barrier hardware and stand-off distances. Slough sets a 75 mm survey threshold. The two Sydney councils share one standard, and both print their lists in terms of root zones rather than a single protection area.
Sources
- Bassetlaw District Council, Tree surveys and landscaping assessments, page last updated January 9, 2026, read October 16, 2026
- Leeds City Council, Existing Trees and Development: Landscape Guidance No. 1, tree survey guidance note (PDF), read October 16, 2026
- Slough Borough Council, Tree Survey, AIA and AMS, Local Validation List directory, read October 16, 2026
- North Sydney Council, Trees in Development Applications and arborist reports, read October 16, 2026
- Inner West Council, Tree works checklist: Tree Protection Plan and Specification (PDF, 2026), read October 16, 2026