Tree work safety in France: the August 4, 2005 order on work in trees using ropes
France's order of August 4, 2005 treats rope work in trees as an exceptional case where one rope can be used. If an anchor fails, a fall may not exceed 1 metre, and training covers four topics.
Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.
The French text on rope work in trees is an order (arrêté) of August 4, 2005, signed for the Ministry of Agriculture and Fisheries and the Ministry of Employment. It was printed in the Journal officiel on August 30, 2005, under reference NOR AGRF0501906A. The named codes and training bodies are described here as published. It is not training and does not teach the work.
The four articles
| Article | Content |
|---|---|
| 1 | Workers moving through trees in their protective equipment, including pruning, topping, taking a tree down in sections or collecting tree seed, are in an exceptional circumstance. In it, using two ropes makes the work more dangerous than using one |
| 2 | Where one rope is used during progression, the method must be such that if an anchor point fails, the fall of the worker in protective equipment does not exceed 1 metre. Once the worker is stable, a complementary safety means with an independent anchor point must be used, so that if one device breaks the worker is still held |
| 3 | The training required by the Labour Code must cover four phases: recognising the tree and the anchor points for the task; choosing the method, equipment and anchor points to suit the tree's structure; organising progression; organising rescue |
| 4 | The labour relations director and the forestry and rural affairs director carry out the order |
The order cites the Labour Code article then numbered R. 233-13-37. It also cites two prior opinions. One is from the Conseil supérieur de prévention des risques professionnels, dated March 8, 2004. The other is from the Commission nationale d'hygiène et de sécurité du travail en agriculture, dated March 9, 2004.
How the order fits the Labour Code
The OPPBTP, the building trades prevention body, publishes an analysis of Article 1, updated June 1, 2022. It records that work on ropes is barred in principle, with exceptions in the Labour Code. Tree progression is one of the exceptional circumstances in which one rope may replace two.
The MSA Alpes-Vaucluse booklet 3b, on working at height in pruning, prints the Labour Code articles behind it. Article R. 4323-89 sets the conditions for rope access and positioning:
- The system has at least one working rope, as the means of access, and a safety rope fitted with a fall arrest system.
- Tools and accessories are attached by a suitable means.
- Workers wear a fall arrest harness connected to both ropes.
- The working rope has a safe descent and ascent mechanism and a self-locking system.
- The safety rope has a mobile fall arrester that follows the worker.
- Work is planned and supervised so help can reach the worker at once in an emergency.
- Workers receive training specific to the operations and to rescue procedures.
Article R. 4323-90 allows a single rope where, on the risk assessment, a second rope would make the work more dangerous, provided the worker is never alone. It points to the 2005 order for those circumstances. Article R. 4323-61 keeps a fall arrest system to a fall of no more than one metre and says a worker in such equipment must never be left alone.
Training and equipment checks
The MSA booklet says the training duty in the order is the employer's general duty to train employees on hiring and whenever needed. The specialist pruning certificate (CS taille et soins aux arbres) is one course that meets it, but the booklet says no national rule makes it mandatory. It notes one exception: in the départements 04 and 05, a prevention provision approved on January 27, 1992 makes either that certificate or the monteur élagueur qualification attestation mandatory.
For rescue, the booklet lists first aid at work (SST), a two-day course with a refresher every two years, and a climber-rescuer course of usually three days. It cites a March 19, 1993 order requiring fall protection equipment to be checked each year by qualified staff. It also points to a 2007 ministry note (DGFAR/SDTE/N2007-5018) for the rule that a work-positioning lanyard or a doubled rope must be in place at the work position.
The booklet gives the standards behind the gear: EN 358, EN 361 and EN 813 for harnesses and belts, and EN 1891 for semi-static ropes. It describes type A ropes of 12 to 13.5 millimetres.
Sources
- Journal officiel de la République française, Arrêté du 4 août 2005 relatif à la prévention des risques de chutes liés aux travaux réalisés dans les arbres au moyen de cordes, August 30, 2005 (copy hosted by MSA Ile-de-France), read October 19, 2026
- OPPBTP, Droit de la prévention: article 1er de l'arrêté du 4 août 2005, updated June 1, 2022, read October 19, 2026
- MSA Alpes-Vaucluse, Travail en hauteur en élagage, livret pratique n° 3b, undated, read October 19, 2026