Truck and trailer rules in Alabama: licence classes, brakes, weights and carrier numbers
Alabama's trailer brake rule is Administrative Code 760-X-1-.09, with a 3,000 pound line and a 15 minute breakaway hold. The state Motor Carrier Safety Unit exempts intrastate trucks at 26,000 pounds or less from federal rules.
Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The state text comes from the Alabama Law Enforcement Agency (ALEA), its Motor Carrier Safety Unit and the Federal Highway Administration's summary of Alabama weight law. The federal background is 49 CFR parts 383 and 393.
At a glance
| Item | What the sources record |
|---|---|
| Federal CDL groups | Group A: combination at 26,001 pounds or more with a towed unit over 10,000 pounds. Group B: single vehicle at 26,001 pounds or more |
| State CDL weight line | Not printed on the ALEA pages read |
| Intrastate carrier at 26,000 pounds or less | ALEA says exempt from all federal regulations inside Alabama, and no USDOT number is required |
| Trailer brakes | Brakes on all wheels, except trailers of 3,000 pounds gross weight or less that meet a 40 percent test |
| Breakaway | Trailers over 3,000 pounds built after January 1, 1972 apply brakes automatically on breakaway and hold them at least 15 minutes |
| Weights | 20,000 pounds single axle; 34,000 or 36,000 pounds tandem; 80,000 or 84,000 pounds gross |
| Safety chain, width, height, length | Not printed in the texts read |
Licence classes and the carrier number
Federal rule 49 CFR 383.91 sets three commercial vehicle groups. A combination rated 26,001 pounds or more, where the towed vehicle's rating is over 10,000 pounds, falls in Group A. A single vehicle rated 26,001 pounds or more, or one towing a unit rated 10,000 pounds or less, falls in Group B. Smaller vehicles that carry 16 or more people or hazardous materials make up Group C.
The ALEA Motor Carrier Safety Unit works with the Federal Motor Carrier Safety Administration. Its question and answer page says every commercial vehicle in Alabama carries an interstate or intrastate USDOT number. It then makes one exception. An intrastate company running straight trucks, or trucks with trailers, rated 26,000 pounds or less is exempt from all federal regulations inside Alabama, and needs no USDOT number. Passenger buses and hazardous material haulers are carved out of that exception.
A second answer deals with a trooper's inspection. A business vehicle counts as commercial if its rating is over 10,000 pounds, or a truck and trailer together rate 26,001 pounds. ALEA adds that a driver without a CDL still needs a current medical card, and a logbook unless the driver meets the 100 air-mile exemption. That answer reads differently from the exemption above, and both are printed.
Trailer brakes and breakaway
Rule 760-X-1-.09 of the ALEA Administrative Code, filed April 23, 1982 under Code of Alabama section 32-2-9, covers brakes. Every motor vehicle, trailer, pole trailer and combination needs service brakes adequate to control, stop and hold the vehicle under all loading and on any grade, and parking brakes that hold on any grade where it runs.
Brakes must act on all wheels, with listed exceptions. One covers a trailer, semi-trailer or pole trailer with a gross weight not over 3,000 pounds. That trailer's wheels must carry no more than 40 percent of the gross weight of the towing vehicle, and the combination must still meet the performance test. Federal rule 49 CFR 393.42 carries a 3,000 pound exception of its own, measured on axle weights against the same 40 percent.
Under subsection (1)(d), a trailer with air or vacuum brakes needs them acting on all wheels, as does a trailer over 3,000 pounds built or assembled after January 1, 1972. Those brakes apply "automatically and promptly" on breakaway from the tow vehicle and stay applied for at least fifteen minutes. A towing vehicle built after that date must be stoppable with its service brakes if the trailer breaks away.
| Vehicle class in the rule | Braking force, share of gross weight | Stopping distance from 20 mph |
|---|---|---|
| Passenger vehicle seating 10 or fewer, with no manufacturer's gross rating | 52.8 percent | 25 feet |
| Two-axle tow vehicle with a trailer of 3,000 pounds or less | 43.5 percent | 40 feet |
| All other vehicles and combinations | 43.5 percent | 50 feet |
Subsection (3) adds that brakes be kept in good working order and adjusted to operate as equally as practicable on both sides of the vehicle.
Weights
The Federal Highway Administration summary points to Code of Alabama section 32-9-20 and following. Its exhibit for regular operations, those without a special permit, prints these limits.
| Axle group | Limit |
|---|---|
| Single axle | 20,000 pounds |
| Tandem axle | 34,000 pounds on Interstate highways; 36,000 pounds elsewhere |
| Tridem axle | 42,000 pounds |
| Gross weight | 80,000 pounds on Interstate highways; 84,000 pounds with 6 or more axles elsewhere |
State law allows a 10 percent enforcement tolerance on non-Interstate highways. An auxiliary power or idle reduction unit adds up to 400 pounds, capped at its certified weight. Dump trucks, concrete mixers and trucks built for special work are held to 20,000 pounds per axle plus tolerance when all axles have brakes. On weight, ALEA answers that a vehicle cannot carry more than the manufacturer's gross vehicle weight rating on the plate, or the gross weight allowed under section 32-9-20(a)(4). Truck tags and fuel stickers come from the Alabama Department of Revenue, and county courts set fines on inspection tickets.
Sources
- Alabama Law Enforcement Agency, Motor Carrier Safety Unit and frequently asked questions, read October 19, 2026
- Alabama Law Enforcement Agency, Administrative Code rule 760-X-1-.09 Adequacy of brakes, filed April 23, 1982, read October 19, 2026
- Federal Highway Administration, Compilation of Existing State Truck Size and Weight Limit Laws, Appendix A, Alabama, read October 19, 2026
- U.S. Code of Federal Regulations, 49 CFR 393.42 Brakes required on all wheels, via eCFR, read October 19, 2026
- U.S. Code of Federal Regulations, 49 CFR 383.91 Commercial motor vehicle groups, via eCFR, read October 19, 2026