Utility and line-clearance tree work awards in Britain: the 0038 series and electricity company authorisations
City & Guilds publishes a 0038 series of utility arboriculture certificates: Basic Electrical Knowledge (0038-30), Aerial Pruning (0038-33) and, at Level 4, Surveyor (0038-40). The Surveyor pack cites the ENA clearances and Engineering Recommendation G55.
Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.
This page draws on three City & Guilds documents, hosted on the NPTC site, for the Certificates of Competence in Utility Arboriculture. It is not training and does not teach the work. The Energy Networks Association documents they cite did not open, so what appears here about them is what the City & Guilds pack says.
The series in outline
| Award | Level and size | Entry |
|---|---|---|
| 0038-30 Basic Electrical Knowledge (Ofqual 603/7885/2) | Level 3, 16 guided learning hours, 17 total qualification time, age 18+ | No entry requirements |
| 0038-33 Aerial Pruning (Ofqual 603/7888/8) | Level 3, 8 guided learning hours, 10 total qualification time, age 18+ | 0038-30, 0038-31 (Tree Species Recognition, Growth Characteristics and Associated Hazards), 0038-32 (Ground-based Pruning), and Level 2 awards 0039-20 to 0039-23 or equivalents |
| 0038-40 Surveyor | Level 4, expected assessment time 6 hours | 0038-30 and 0038-31, or equivalents |
Each is graded pass only. The Basic Electrical Knowledge and Aerial Pruning handbooks set a one to one practical assessment with oral questioning by an NPTC City & Guilds approved assessor. The Surveyor pack sets a closed book assessment with an expected time of 6 hours. The Level 2 prerequisites for aerial pruning are chainsaw maintenance and cross-cutting (0039-20), felling small trees up to 380 mm (0039-21), climbing and aerial rescue (0039-22) and using a chainsaw from a rope and harness (0039-23).
0038-30: Basic Electrical Knowledge
The handbook, version 1.1 of March 2022, says the award is for individuals who operate around utility services as part of work in arboriculture, forestry or other industries. It covers hazards, risks, controls, emergency planning, legislation, equipment, tree types and condition, safety documents, ground clearance and safety zones, tree electrical categories, overhead line components, good practice, and roles and responsibilities. The unit lists ten topics. They run from risk assessment and PPE through proximity, vicinity and live zones, ladders and ropes, and emergencies and rescue, to permits to work, safety documents and safety points, and overhead line components.
0038-33: Aerial Pruning
The December 2021 handbook, version 1.0, describes the award as giving knowledge, understanding and skills for aerial pruning in the utility arboriculture sector. It covers hazards, risk, controls, emergency procedures, industry guides and potential environmental damage, site zoning, tree condition assessment, working at height assessment, tree factors and characteristics, and aerial tree pruning. The handbook says the award supports progression into jobs where work around utility services is part of the role.
0038-40: the Surveyor assessment pack
The Level 4 pack, version 1.1 of March 2022, has two units: 401 Utility Arboriculture Surveyor Theory and 402 Utility Arboriculture Surveyor Practical. It lists the law and guidance a candidate is asked to explain.
- Schedule 4, paragraph 9, of what the pack calls the Electricity At Work Act 1989: the pack lists work to trees and shrubs that obstruct or interfere with the network, and a 21-day notice to owner and occupier.
- Electricity Safety, Quality and Continuity Regulations 2002 and their 2006 amendments: safety standards for the public, and the Network Operator's duty to maintain minimum clearances. The 2006 amendments extend the duty to make overhead networks resilient to major storms by reducing the effect of falling trees.
- Electricity at Work Regulations, regulation 14, on live working.
- Tree Preservation Order and conservation area law, with the exemptions afforded to statutory Network Operators, and the Forestry Act 1967.
The pack also names industry documents. For trees that can support a person or ladder, the minimum clearances in ENA Technical Specification 43-8 may include these figures:
- 3 m from low voltage up to 33 kV;
- 3.2 m at 66 kV, and 3.6 m at 132 kV;
- 4.6 m at 275 kV, and 5.3 m at 400 kV.
Engineering Technical Report 136, in the pack's words, sets generic good practice for vegetation management that meets the reasonable aspirations of all stakeholders. Engineering Recommendation G55 appears with live zones, vicinity zones, categorisation of trees, competence of operators and electrical risk assessment. HS(G)47 and GS6 appear with underground cables and barriers.
A 2022 revision note adds that in areas that use voltages other than those listed, regional variation may be applied.
Electricity company authorisations
None of the three documents describes an electricity company's own authorisation scheme. The Surveyor pack points only to the Network Operator's role: clearance duties, notices and agreed works beyond the minimum safety clearance. The ENA documents and the network operators' pages returned an access error, so no authorisation rules are reported.
Sources
- City & Guilds (NPTC), Level 3 Certificate of Competence in Utility Arboriculture Basic Electrical Knowledge (0038-30), Qualification Handbook, March 2022 version 1.1, read October 21, 2026
- City & Guilds (NPTC), Level 3 Certificate of Competence in Utility Arboriculture Aerial Pruning (0038-33), Qualification Handbook, December 2021 version 1.0, read October 21, 2026
- City & Guilds (NPTC), Level 4 Certificate of Competence in Utility Arboriculture Surveyor (0038-40), Assessment Pack, March 2022 version 1.1, read October 21, 2026