ArbNation Join free

Whole-body vibration for chipper, truck and tractor operators: HSE and WorkSafeBC

Great Britain sets a whole-body vibration action value of 0.5 m/s2 A(8) and a limit value of 1.15 m/s2 A(8). HSE ties the risk to seats, rough ground and back pain.

Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The British text is the Health and Safety Executive's pages on the Control of Vibration at Work Regulations 2005 and on whole-body vibration. The Canadian text is WorkSafeBC's vibration topic page. None of the three pages gives values for tree-care machines such as chippers, stump grinders or aerial lift trucks.

What whole-body vibration is

HSE describes whole-body vibration (WBV) as vibration transmitted through the seat or feet of employees who drive mobile machines or other work vehicles over rough and uneven surfaces as a main part of their job. Large shocks and jolts may cause health risks including back pain.

HSE names tractors, fork lift trucks and quarrying or earth-moving machinery as examples of machines whose drivers may be exposed. Posture and heavy lifting also contribute to back problems for drivers. HSE adds that further study is needed on the part WBV itself plays.

WorkSafeBC gives the same split into two hazards. Hand-arm vibration comes from power tools. Whole-body vibration comes from surfaces where a worker stands or sits. It lists cold and damp conditions as other risk factors.

The British action and limit values

Whole-body vibration values, Control of Vibration at Work Regulations 2005
ValueLevelHSE wording
Exposure action value0.5 m/s2 A(8)The level at which employers should introduce technical and organisational measures to reduce exposure
Exposure limit value1.15 m/s2 A(8)A level which should not be exceeded

The regulations allowed a transitional period for whole-body vibration until 2010 for older machinery, and a further one to 2014 for the agriculture and forestry sectors. HSE notes the regulations rest on European Union Directive 2002/44/EC and do not cover members of the public exposed outside work.

HSE says risk is likely to be low at or just above the action value, and that exposures closer to the limit value need more control. Employers may average over a week instead of a day only on very limited occasions, such as emergency work, where the person's exposure is usually below the action value.

Controls HSE lists

HSE first asks employers to consider other ways or machines that remove the exposure, especially where large shocks and jolts occur. If that is not possible, exposure is reduced as low as reasonably practicable. HSE's list of control measures includes:

  • working methods that cut exposure, such as less transport of materials;
  • work equipment of suitable ergonomic design, including suspension seats and choice of tyres;
  • regular maintenance of vehicles, their seats and suspension;
  • maintenance of unmade roads and ground conditions, with filling potholes as one example;
  • information and training for employees;
  • rest periods, and a short break between operating mobile machinery and manual handling;
  • protection from cold and damp, since cold may speed the onset of back pain or worsen it.

HSE states that no personal protective equipment exists for WBV. Limiting the duration of exposure is the final resort once other reasonable steps are taken. HSE gives job rotation and spreading a task over several days as examples. HSE adds that the limit value is not a target.

WorkSafeBC's approach

In British Columbia the vibration topic sits within musculoskeletal injury (MSI) rules. Employers must assess MSI risks, then eliminate or minimize them, and must educate and train workers about those risks. WorkSafeBC publishes the Guide to Musculoskeletal Injury (MSI) Risk Assessment, dated July 2022, for this.

The page groups controls under three headings. Engineering controls ask whether different tools, improved seating, cushions or matting could be used. Administrative controls ask about task time limits, job rotation and frequent breaks. Protective equipment is called the least effective control and must be used with at least one other. The employer consults the joint health and safety committee or the worker health and safety representative when choosing controls. WorkSafeBC sets no numeric WBV value on this page.

Sources