Hand-arm vibration limits by country: action values, limit values and what each triggers
Great Britain and the EU print the same two hand-arm vibration numbers: an action value of 2.5 m/s2 and a limit value of 5 m/s2, both over an 8-hour day. British Columbia points to an outside publication instead.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. It sets out the hand-arm vibration figures in the Control of Vibration at Work Regulations 2005 (Great Britain), Directive 2002/44/EC (European Union) and the WorkSafeBC Occupational Health and Safety Regulation, and the duty each one triggers.
The numbers side by side
| Regulator | Action value | Limit value |
|---|---|---|
| Great Britain, regulation 4 | 2.5 m/s2 A(8) | 5 m/s2 A(8) |
| European Union, Article 3(1) | 2.5 m/s2 | 5 m/s2 |
| British Columbia, section 7.11 | None printed | By reference to ACGIH |
The British Columbia rule points to the ACGIH Threshold Limit Values publication, dated 2003 as amended from time to time.
The Directive prints the action value with a decimal comma, 2,5 m/s2.
What the action value triggers
Under regulation 6(2) of the British regulations, an employer who cannot remove the risk at source and who is likely to reach or pass an action value must set up a programme of organisational and technical measures.
Article 5(2) of the Directive uses the same trigger. Once the action value is exceeded, the employer must set up a programme of technical or organisational measures. It lists alternative working methods, low-vibration equipment, maintenance, limiting the duration and intensity of exposure, rest periods and clothing against cold and damp.
What the limit value triggers
Regulation 6(4) says the employer must not expose employees above the limit value. If it is exceeded, the employer must reduce exposure below it at once, find why it was exceeded and change the measures so it is not exceeded again. Regulation 6(5) sets out a weekly-average exception for exposure that is usually below the action value but varies markedly. Article 5(3) of the Directive carries the same duty, and the Directive allowed Member States a transitional period of up to five years from 6 July 2005 in some cases.
Assessment duties
Article 4 of the Directive has the employer assess, and where necessary measure, the vibration workers are exposed to. Assessment can rest on observing working practices and on the probable vibration of the equipment in use. The employer keeps the risk assessment on a suitable medium and up to date, and Article 4(4) lists what it must consider, from the level and duration of exposure to low temperatures.
British Columbia duties
Section 7.12 requires hand-arm vibration to be evaluated in line with ISO 5349-1:2001 and ISO 5349-2:2001. Where a worker is exposed above the exposure limits, section 7.13 requires an exposure control plan and section 7.14 requires the employer to tell the worker about the hazard and its effects. Section 7.15 puts the labelling of vibrating equipment on the employer if the manufacturer has not labelled it. Section 7.16 requires employers, to the extent practicable, to keep the hands and arms of exposed workers out of the cold.
The measurement standard
ISO 5349-1, listed in the Estonian standards catalogue as EVS-EN ISO 5349-1:2002, specifies general requirements for measuring and reporting hand-transmitted vibration exposure in three axes. It defines a frequency weighting and band-limiting filters. Its values can be used to predict adverse effects over the octave bands from 8 Hz to 1,000 Hz.
Sources
- UK Statutory Instrument 2005 No. 1093, Control of Vibration at Work Regulations 2005, regulation 4, read October 16, 2026
- UK Statutory Instrument 2005 No. 1093, regulation 6 (elimination or reduction of exposure), read October 16, 2026
- European Parliament and Council, Directive 2002/44/EC on vibration, EUR-Lex, read October 16, 2026
- WorkSafeBC, OHS Regulation Part 7, Division 2 Vibration Exposure, read October 16, 2026
- Estonian Centre for Standardisation and Accreditation, catalogue entry EVS-EN ISO 5349-1:2002, read October 16, 2026