Why climbers fall: the causes named in FACE reports and published injury reviews
In a review of 865 US tree-work deaths, climber falls led all causes at 173. The review sorts them into a short list: a failing tree, a failing anchor, a cut line, a disconnected system.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
The named codes and training bodies are described here as published. It is not training and does not teach the work. The causes below are grouped as the reports group them, and none of it is a judgement about any one climber.
The size of the problem
The CDC's Morbidity and Mortality Weekly Report on tree care deaths covers 1992 to 2007. It counts 1,285 deaths, about 80 a year. Falls to a lower level caused 34 percent (434 deaths), being struck by an object caused 42 percent, and electric current 14 percent. Of the dead, 44 percent were trimming or pruning and 23 percent were felling.
Ball, Vosberg and Walsh reviewed OSHA Fatality and Catastrophe records and Bureau of Labor Statistics sources for US arboricultural operations from 2001 to 2017. They found 865 fatal and 441 nonfatal incidents. Climber falls were the leading fatal event, at 173 deaths (20.0 percent) and 136 nonfatal injuries (30.1 percent).
Where the height was recorded, the mean fatal fall was 13.6 m and the mean nonfatal fall 6.4 m. Fatal falls ranged from 4.6 m to 30.5 m.
Causes in the AUF review
The review sorts the 173 fatal climber falls by what failed. Fatal percentages are shares of all 865 fatal incidents, and nonfatal percentages are shares of all 441 nonfatal incidents.
| Cause | Fatal | Nonfatal |
|---|---|---|
| Fall with a failing tree | 41 (4.7%) | 14 (3.2%) |
| Disconnecting from the climbing system | 31 (3.6%) | 27 (6.2%) |
| Failure of the climbing line anchor | 27 (3.1%) | 29 (6.6%) |
| Climbing line or lanyard severed by a saw or another line | 26 (3.0%) | 25 (5.7%) |
| Climbing without a climbing system | 14 (1.6%) | 10 (2.3%) |
| Friction hitch loosened, line caught by traffic, line around the neck, other | 31 (3.6%) | 13 (2.9%) |
| Off the rappel, or rope end through the hitch | 2 (0.2%) | 9 (2.0%) |
| Spurs kicking out | 1 (0.1%) | 9 (2.0%) |
The review ties each group to the ANSI Z133-2017 clause it matches.
- Disconnections often came while transferring from ascending to working, or while repositioning the line. ANSI Z133-2017 8.1.6 requires a climber to stay secured through another line during repositioning, and 8.1.7 requires climbers to be tied in before leaving a ladder to enter the tree.
- About two-thirds of the anchor failures involved the climber pruning off the branch or treetop that held the line. The review says this most often happened when the climber was distracted and forgot where the anchor was. Fatigue is sometimes named. ANSI Z133-2017 8.1.11 calls for the anchor point to be inspected from the ground and, if suitable, loaded to about twice the climber's weight.
- For severed lines, ANSI Z133-2017 8.1.4 calls for two means of being secure, and 6.3.6 requires two when operating a chain saw in the tree.
- Falls with a failing tree usually came when rigging loads stressed the tree and it failed just below the climber or near the root collar. The review says either the assessment required by ANSI Z133-2017 3.4.8 and 8.5.1 was not made or the crew misjudged the tree.
Aerial device operators are counted separately: 93 fatal falls, 49 of them out of the bucket.
Washington FACE: a cut flip line
Washington's FACE program published narrative 71-269-2025 on August 4, 2025, for an incident on December 1, 2023. A climber on a five-member crew removing a 120-foot fir had climbed about 50 feet, cutting branches. He fell backward to the pavement. He had cut his flip line with his chainsaw. No one is named here or in the report.
Investigators found he had a second rope on his saddle but did not tie it off, as ANSI Z133-2017 6.3 requires when using a chainsaw. His employer and supervisor let him use a lighter, personally owned soft-fiber rope as a flip line instead of the heavier cut-resistant steel-core line they provided. The supervisor said they routinely allowed trimmers to use gear that was comfortable or easier to handle. The employer's accident prevention program was outdated, and safety meetings and PPE hazard assessments were not documented.
The recommendations were policies requiring steel-core flip lines, except near power lines, and high-strand rope lifelines as a second attachment. They also included documented recurring training in arborist fall protection, including identification and inspection of climbing gear.
Washington's 2025 hazard alert, Preventing Tree Trimmer Deaths, puts the case in context. It counts 228 landscaping services deaths across the United States in 2023 and 11 in Washington from 2020 through 2024, most of them tree trimmers in falls. Its tips for employers include a site-specific job hazard assessment, arborist-certified equipment for lifelines and rigging, and direct supervision and recurring training by a qualified arborist or a Certified Tree Care Safety Professional.
The 2001 to 2017 data are also summarized on the page on tree work incidents, and other falls are covered in the guide to falls from height.
To correct or remove an entry, write to the address at the foot of this page.
Sources
- Washington State Department of Labor and Industries, WA FACE narrative 71-269-2025, Tree Trimmer Falls 50 Feet While Cutting Branches, August 4, 2025, read October 16, 2026
- Washington State Department of Labor and Industries, WA FACE hazard alert 47-35-2025, Preventing Tree Trimmer Deaths, read October 16, 2026
- Ball, Vosberg and Walsh, A Review of United States Arboricultural Operation Fatal and Nonfatal Incidents (2001-2017), Arboriculture and Urban Forestry 46(2), March 2020, read October 16, 2026
- CDC, MMWR, Work-Related Fatalities Associated with Tree Care Operations, United States, 1992 to 2007, reviewed April 22, 2009, read October 16, 2026