ArbNation Join free

Wood pellet and briquette standards: ENplus, PFI and ISO 17225

ISO 17225-2 grades wood pellets A1, A2 and B, and ENplus certifies to the same three classes with ash limits of 0.70, 1.20 and 2.00 percent. The Pellet Fuels Institute runs the US program, and ISO 17225-3 covers briquettes.

Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The ENplus limits below come from ENplus ST 1001:2022, first edition, which entered into force on January 1, 2023 and replaced the ENplus Handbook version 3.0. The ISO 17225 text is sold, not free, so the ISO side comes from standards-body catalogue pages and a Natural Resources Canada bulletin.

The standards and who runs them

Pellet and briquette standards and schemes in the opened sources
NameCoversWho
EN ISO 17225-2:2021Graded wood pellets, non-industrial and industrial use. Thermally treated pellets such as torrefied pellets are outside its scope.ISO and CEN, listed by EVS as valid from June 1, 2021
EN ISO 17225-3:2021Graded wood briquettes. Torrefied briquettes are outside its scope.ISO and CEN, listed by EVS as valid from March 15, 2021
ENplus ST 1001:2022Requirements for pellet producers, traders and service providers, with classes A1, A2 and BEuropean Pellet Council (Bioenergy Europe) and the German Pellet Institute (DEPI)
PFI Standards ProgramSpecifications for residential and commercial grade pellet fuelPellet Fuels Institute, with accredited third-party auditing agencies

EVS lists earlier 2014 editions of both ISO 17225 parts. Both 2021 parts cover only wood from three raw material classes of ISO 17225-1: forest, plantation and other virgin wood (1.1), by-products and residues of the wood processing industry (1.2) and chemically untreated used wood (1.3.1).

ENplus classes and limits

ENplus ST 1001 is based on ISO 17225-2 for raw material and product properties. It defines three classes: ENplus A1, ENplus A2 and ENplus B. Its Table 4 gives these thresholds.

ENplus ST 1001:2022, first edition, Table 4 (selected properties)
PropertyA1A2B
Moisture, as received, w-%10.0 or less10.0 or less10.0 or less
Ash, dry basis, w-%0.70 or less1.20 or less2.00 or less
Mechanical durability, w-%98.0 or more97.5 or more97.5 or more
Bulk density, kg/m³600 to 750600 to 750600 to 750
Fines under 3.15 mm, bulk, w-%1.0 or less1.0 or less1.0 or less
Net calorific value, kWh/kg4.6 or more4.6 or more4.6 or more
Nitrogen, dry basis, w-%0.3 or less0.5 or less1.0 or less
Ash deformation temperature, °C1200 or more1100 or more1100 or more

Diameter is 6 or 8 mm with a tolerance of 1 mm for all three classes, and length runs from 3.15 to 40 mm. Fines in bags are limited to 0.5 w-% for A1 and A2. Sulfur is 0.04 w-% or less for all classes, and chlorine is 0.02 w-% or less for A1 and A2 and 0.03 for B. Additives are limited to 2.0 w-% in total, of which 1.8 in production and 0.2 after production. The table also sets dry-basis limits for arsenic, cadmium, chromium, copper, lead, mercury, nickel and zinc. Ash is produced at 815 °C. Moisture is tested to ISO 18134, ash to ISO 18122 and durability to ISO 17831-1.

On raw material, ENplus A1 allows stem wood (1.1.3) and chemically untreated by-products and residues (1.2.1). A2 adds whole trees without roots (1.1.1) and logging residues (1.1.4). B allows forest, plantation and other virgin wood (1.1), 1.2.1 and chemically untreated used wood (1.3.1). The standard notes that ENplus deviates from ISO 17225-2: demolition wood and chemically treated wood are not allowed for any ENplus certified pellets.

Natural Resources Canada's printout of ISO 17225-2

Natural Resources Canada Solid Biofuels Bulletin No. 4, Graded Wood Pellets, prints the grades of the Canadian adoption, CAN/CSA-ISO 17225 Part 2. It rates A1 and A2 as suitable for residential and commercial applications.

Table 1 of NRCan Solid Biofuels Bulletin No. 4
PropertyA1A2B
Moisture, % of weight10 or less10 or less10 or less
Ash, % of weight0.7 or less1.2 or less2.0 or less
Durability, % of weight97.5 or more97.5 or more96.5 or more
High calorific value, MJ/kg18.6 or more18.6 or more18.6 or more
Bulk density, kg/m³600 to 750600 to 750600 to 750

The two documents print different durability limits. ENplus sets 98.0 for A1 and 97.5 for A2 and B, while the NRCan table prints 97.5, 97.5 and 96.5. The earlier ENplus handbook version 3.0 of August 2015 listed ash limits of 0.7, 1.2 and 2.0 and the same ENplus durability floors of 98.0 for A1 and 97.5 for B. The bulletin says ENplus was adopted in Canada in 2013 as CANplus, and that both schemes follow ISO 17225-2 with classes A1, A2 and B.

Pellet Fuels Institute

The Pellet Fuels Institute describes its Standards Program as a third-party accredited program that lets consumers identify PFI Graded Fuel from producers whose facilities are subject to regular inspection and lab testing. A Quality Mark on the bag identifies qualified producers. The PFI FAQ says the program provides specifications for residential and commercial grade pellet fuel. PFI states that the EPA's March 2015 rule for new residential wood heaters requires fuel graded through an EPA-authorized standards program, with the PFI program the only US program included. The PFI pages print no grade limits.

Briquettes

Of the opened sources, only the EVS catalogue entry for ISO 17225-3 addresses briquettes, and it prints the scope but no class limits. No ash or moisture limit for briquettes is printed here.

Sources