Work clothing for tree crews: sleeves, trousers, loose clothing and hi-vis in the regulators' words
HSE lists non-snag outer clothing for aerial tree work, the US Forest Service requires a long sleeved shirt and sturdy pants for climbing, and OSHA and Cal/OSHA name loose clothing as a chipper entanglement hazard.
Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.
The named regulators and codes are described here as published. It is not training and does not teach the work. It covers ordinary clothing worn under or around chainsaw protection. Cut-resistant trousers and jackets have their own guides, linked below.
Sleeves and trousers for climbing
The US Forest Service National Tree Climbing Guide (April 2015, 2015 electronic edition) lists required personal protective equipment for all climbing assignments in section 2.2. The list includes a climbing harness, climbing helmet, eye protection and a long sleeved shirt and sturdy pants. Gloves are recommended for general climbing, and the guide calls sturdy gloves a must for any rappelling.
Section 9.6 of the same guide lists what is worn when operating a chainsaw in a tree. It repeats the long sleeve shirt and adds eye protection to ANSI Z87.1, hearing protection, a climbing helmet to ANSI Z89.1 Type II or UIAA, gloves, and boots of heavy leather or other cut-resistant material. Leg protection must meet Forest Service Specification 6170-4 or ASTM F-1897. The guide says chainsaw protective pants or protective inserts for the legs are acceptable alternatives.
Non-snag clothing and hi-vis in the UK
HSE's page on personal protective equipment for aerial tree work lists what chainsaw users wear when climbing trees: helmet, eye protection, hearing protection, gloves, leg and groin protection, protective boots and non-snag outer clothing. It adds that high-visibility clothing may also be appropriate.
HSE credits AFAG with the helmet and Type C leg protection recommendations. The clothing line carries no standard number and no AFAG credit.
Loose clothing near machines
The OSHA Safety and Health Information Bulletin on wood chippers (SHIB 04-16-2008) lists clothing and apparel to prevent entanglement. It calls these industry and ANSI recommendations, citing ANSI Z133.1-2006, sections 3.4 and 8.6.3: gloves with no cuffs (non-gauntlet), close-fitting and tucked-in clothing with no stray straps or strings, and no jewelry while operating chippers.
The bulletin states that it is advisory and creates no new legal obligations. In its accident discussion, an operator wearing leather gloves with cuffs was pulled into a chipper, and the bulletin says it is possible that a tree branch snagged a cuff. The bulletin also counts 39 chipper deaths in OSHA's records for 1996 to 2005, 78 percent from being caught in the machine.
The Cal/OSHA fact sheet Tree Work Safety (October 2024) has a chipper list of its own. One line reads do not wear loose clothing, safety or climbing gear, or jewelry that can snag and be pulled in. Another says do not wear ropes and keep ropes away from the feed opening.
| Publisher | Clothing wording |
|---|---|
| US Forest Service climbing guide, 2015 | Long sleeved shirt and sturdy pants for climbing. Beards, long hair and loose clothing kept secured and away from the rappel device |
| HSE (UK), aerial PPE page | Non-snag outer clothing. High-visibility clothing may also be appropriate |
| OSHA chipper bulletin, 2008 | Close-fitting, tucked-in clothing with no stray straps or strings. Non-gauntlet gloves. No jewelry at a chipper |
| Cal/OSHA fact sheet, October 2024 | No loose clothing, safety or climbing gear, or jewelry that can snag and be pulled in at a chipper |
Loose clothing and rappel devices
The Forest Service guide's rappelling section covers the same hazard on a rope. It says to keep beards, long hair and loose clothing secured and away from the rappel device, because unsecured material can jam the device, halt the descent and cause painful injury.
The guide adds that if clothing or hair lodges in a rappel device, an ascender, prusik knot or footlock may be used to take pressure off the device while the material is cleared. It warns that cutting clothing or hair free from a jammed device calls for extreme caution, because a rope under tension cuts very easily.
High-visibility attire
Cal/OSHA names high-visibility clothing in its list of personal protective equipment that employer training has to cover, alongside hard hats, face shields, safety glasses, shoes, gloves and hearing protection. The fact sheet also lists high-visibility attire among its general safety information for employees: how to use it and the importance of positioning so others can see the worker easily.
The same fact sheet says the employer provides proper tools, equipment, PPE and fall protection gear. It also says the employer protects tree workers from heat-related illness, with shade, drinking water and encouragement to drink often.
Sources
- HSE (UK), Personal Protective Equipment (PPE) for aerial tree work, page dated September 22, 2026, read October 21, 2026
- USDA Forest Service, National Tree Climbing Guide, 2015 electronic edition (April 2015), read October 21, 2026
- OSHA, Hazards of Wood Chippers, Safety and Health Information Bulletin SHIB 04-16-2008, read October 21, 2026
- California DIR Cal/OSHA, Tree Work Safety fact sheet, October 2024, read October 21, 2026