ArbNation Join free

Hand-held saw vibration: UK 2005 regulations, HSE figures and the ISO 22867 test code

Great Britain has limited hand-arm vibration by regulation since July 6, 2005: 2.5 m/s2 A(8) is the action value and 5 m/s2 A(8) the limit. ISO 22867 sets how makers test saw handles, in editions from 2011 and 2021.

Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The sources are the Control of Vibration at Work Regulations 2005 (SI 2005/1093) as made, two Health and Safety Executive (HSE) pages on hand-arm vibration, and the Estonian standards body's catalogue entry for ISO 22867.

The 2005 regulations

The Control of Vibration at Work Regulations 2005 came into force on July 6, 2005. They define hand-arm vibration as mechanical vibration transmitted into the hands and arms during a work activity. Regulation 4 sets the daily exposure values for hand-arm vibration, normalised to an 8-hour reference period.

Hand-arm vibration values in regulation 4
ValueLevel
Daily exposure action value2.5 m/s2 A(8)
Daily exposure limit value5 m/s2 A(8)

Schedule 1 gives the formula for A(8). The vibration magnitude is the root-mean-square acceleration measured in three directions at the surface the hand touches, frequency-weighted as in BS EN ISO 5349-1:2001. Where both hands are exposed, the greater magnitude is used.

Equipment choice in the regulations

Regulation 5 lists what an employer's risk assessment includes. Two items concern the saw itself: information provided by the manufacturers of work equipment, and the availability of replacement equipment that reduces exposure to vibration. Regulation 6(3) puts the choice of work equipment of appropriate ergonomic design that produces the least possible vibration among the measures to consider. It also lists auxiliary equipment, maintenance programmes and clothing to protect against cold and damp.

Regulation 3(2) holds back the duty in regulation 6(4) to keep exposure under a limit value until July 6, 2010 for work equipment first provided to employees before July 6, 2007 that does not permit compliance with the limit values.

HSE figures for saws

HSE's risk assessment page prints a table of typical vibration levels for common tools. It names the equipment handbook or supplier as the usual source of vibration data and warns that some manufacturer data underestimates workplace vibration by a large amount.

HSE typical vibration levels, m/s2
Tool typeRangeRecommended initial value
Chainsaws3 to 77
Brushcutters, saw head3 to 55
Brushcutters and strimmers, strimmer head2 to 77
Hedge trimmers3 to 147

HSE's advice for employers lists chainsaws and strimmers/brush cutters among the hand-held tools that can cause ill health from vibration.

The ISO 22867 test code

ISO 22867 is the vibration test code for portable hand-held machines with an internal combustion engine. The Estonian standards body lists two editions, EVS-EN ISO 22867:2011, dated January 4, 2012, and EVS-EN ISO 22867:2021, valid from December 31, 2021. The 2021 entry gives its scope as determining the magnitude of vibration at the handles under standardized conditions. It names chain-saws, brush-cutters, grass-trimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden-blowers.

The scope adds that the magnitudes come from an artificial operation but give an indication of the values found in a real work situation. The test code lets the manufacturer verify the effort made on low-vibration design. The entry links the standard to the Machinery Directive 2006/42/EC.

Sources