Chipper noise: declared sound power and Directive 2000/14/EC marking
Under the 2001 outdoor noise regulations as made, a chipper carries a CE marking and a guaranteed sound power level. HSE research found that sound power test unreliable for picking quieter machines.
Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The rules come from the Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001, Statutory Instrument 2001 No. 1701, in the version as made. The HSE research report RR1173 describes them as the UK implementation of Directive 2000/14/EC and says they were amended in 2001 and 2005. Local noise limits for neighbours are not covered by these sources.
Where chippers sit in the regulations
Schedule 4 defines a shredder or chipper as a powered machine used in a stationary position with one or more cutting devices that reduce bulk organic material to smaller pieces. It has a feed intake opening, a cutting device and a discharge chute. A collecting device may be attached.
Shredders and chippers appear in Schedule 2, the list of equipment subject to noise marking only. Schedule 1 lists equipment with noise limits. The permissible sound power levels in Schedule 3 cover other machines, such as compaction machines, dozers, excavators, compressors and lawnmowers. None of the Schedule 3 rows is for shredders or chippers.
Marking and the declaration
Regulation 8(3) requires the guaranteed sound power level of Schedule 2 equipment to be marked on the machine. Regulation 11 requires the CE marking to be accompanied by that indication. Both must be visible, legible and indelible on each item of equipment.
Regulation 7 requires an EC declaration of conformity with the machine, in English for the United Kingdom. The responsible person keeps a specimen for 10 years from the date the type was last manufactured, with the technical documentation. Regulation 12 requires a copy of the declaration to go to the Secretary of State and the Commission within 28 days of placing the equipment on the market. For Schedule 2 equipment, regulation 10 names the internal control of production procedure in Schedule 8.
The test the regulations set
Schedule 6, Part B, item 50 sets the test for shredders and chippers. The basic noise emission standard is EN ISO 3744:1995, with the test area to ISO 11094:1991. In the open air the environmental correction K2A is zero. The machine is tested under load, chipping a round piece of dry pine or plywood at least 1.5 m long. The piece is sharpened at one end and has a diameter about equal to the maximum the machine accepts under its instructions.
What the HSE research found
HSE report RR1173 (2022) describes work done in 2013 on nine mobile wood chippers made for professional forestry. Earlier HSE measurements had put operator exposure at up to 109 dB(A) at the infeed.
The report finds that sound pressure levels at the operator position suit the identification of lower noise chippers. The sound power test code produces data that are unreliable for that purpose. Two causes are given. Other noise test codes for wood chippers set different operating conditions and can differ by up to 6 dB. The method required by law is incompletely specified and can differ by up to 6 dB for machines with highly directional noise.
The report also notes that the European Commission's position paper on Directive 2000/14/EC says the Part B cycle for shredders and chippers cannot apply to forestry wood chippers, only to garden shredders and chippers. The paper gives other operating conditions: a 4 m long, 50 mm by 50 mm air-dried pine lath at the machine's maximum input speed. Those conditions are not in the UK regulations.
EN 13525:2020
The Estonian standards board record for EN 13525:2020, the safety standard for forestry wood chippers, carries a note. The noise test code in the standard does not comply with the outdoor noise directive 2000/14/EC. The standard applies to chippers used when stationary and loaded by hand through a horizontal or near horizontal infeed chute.
Hearing protection duties for the operator sit in the guide to chipper and grinder noise.
Sources
- legislation.gov.uk, The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001 (SI 2001/1701), as made, read October 21, 2026
- Health and Safety Executive, RR1173 Forestry wood chippers: suitability of measurement procedures for noise advice, summary page, read October 21, 2026
- Eesti Standardimis- ja Akrediteerimiskeskus (EVS), EVS-EN 13525:2020 Forestry machinery, Wood chippers, Safety, catalogue record, read October 21, 2026
- Health and Safety Executive, RR1173 full report (2022, Crown copyright), read October 21, 2026