EN standards for tree climbing equipment in Europe: EN 12841, 358, 795, 1891, 567, 12275
Six EN standards cover the core tree climbing kit: EN 12841 rope adjustment devices, EN 358 work positioning belts and lanyards, EN 795 anchor devices, EN 1891 ropes, EN 567 rope clamps and EN 12275 connectors.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The offices are EVS and BSI, whose catalogue entries give each standard's title, edition and scope.
The six standards
| Standard | Equipment | Scope in the catalogue |
|---|---|---|
| EN 12841:2024 | Rope adjustment devices | Rope adjustment devices intended for use in rope access systems: requirements, test methods, marking and manufacturer's instructions |
| EN 358:2018 | Belts and lanyards for work positioning or restraint | Belts and lanyards for work positioning or restraint: requirements, testing, marking and information |
| EN 795:2012 | Anchor devices | Single-user anchor devices intended to be removable from the structure |
| EN 1891:1998 | Low stretch kernmantel ropes | Title only in the BSI entry: ropes for the prevention of falls from a height |
| EN 567:2013 | Rope clamps | Rope clamps used with dynamic ropes to EN 892, accessory cord to EN 564 and low stretch kernmantel ropes to EN 1891 |
| EN 12275:2013 | Connectors | Connectors for mountaineering, climbing and related activities, as part of the safety system against a fall from height |
Editions and dates
EVS lists EVS-EN 12841:2024 as valid from 1 March 2024, after the 2006 edition. EN 358:2018 is valid from 19 December 2018 and follows the edition of 1 July 2000. EN 795:2012 is valid from 5 September 2012, EN 567:2013 from 2 April 2013 and EN 12275:2013 from 6 May 2013. The earlier editions of EN 567 and EN 12275 are dated 2000 and 1999 in the EVS history.
BSI lists BS EN 1891:1998 as published on 15 September 1998 with the status "Current, Under Review". EN 12841:2024 is "Current, Under Review" at BSI as well, from 31 March 2024.
Exclusions and the Regulation
EVS gives EN 358:2018 an exclusion: restraint lanyards of fixed length that are not integrated into a belt are not covered, and EN 354 covers them. BSI lists EN 795:2012 exclusions for anchor devices that let more than one user attach at once, sport and recreation, equipment made to EN 516 or EN 517, and structural anchors.
EVS ties EN 12841:2024, EN 358:2018, EN 795:2012, EN 567:2013 and EN 12275:2013 to Regulation (EU) 2016/425 on personal protective equipment. Its warning on EN 795 says anchor device types A, C and D get no presumption of conformity with the Regulation, because they are not considered PPE.
Gear under other numbers
Sit harnesses have EN 813, and the guide to withdrawn and superseded climbing gear standards has its edition history. The EN 567 scope names two more: EN 892 for dynamic mountaineering ropes and EN 564 for accessory cord.
Sources
- EVS, EVS-EN 12841:2024 catalogue entry, read October 16, 2026
- EVS, EVS-EN 358:2018 catalogue entry, read October 16, 2026
- EVS, EVS-EN 795:2012 catalogue entry, read October 16, 2026
- EVS, EVS-EN 567:2013 catalogue entry, read October 16, 2026
- EVS, EVS-EN 12275:2013 catalogue entry, read October 16, 2026
- BSI Knowledge, BS EN 1891:1998 Low stretch kernmantel ropes, read October 16, 2026
- BSI Knowledge, BS EN 12841:2024 Rope adjustment devices, read October 16, 2026
- BSI, BS EN 795:2012 Anchor devices, read October 16, 2026