Pruning types by standard: how A300, BS 3998, AS 4373, ETPS and ISA sort them
Five publications sort pruning work into types: ANSI A300, BS 3998, AS 4373, the European Tree Pruning Standard and ISA's Pruning BMP. Only AS 4373 and the European standard print their type lists in public.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. It describes how each publication sorts pruning work. It is not training and does not teach the work.
Public type listings
| Publication | Public listing of pruning types |
|---|---|
| ANSI A300 Tree Care Standards, Tree Care Industry Association (TCIA) | No type list on the TCIA page. It names palm pruning and frond removal as clarified in the consolidated edition, and updates around indiscriminate mechanized tree cutting |
| BS 3998:2010 Tree work, Recommendations, British Standards Institution (BSI) | No type list on the BSI page. It names tree felling, soil care and overgrown hedges as management options for established trees |
| AS 4373-2007 Pruning of amenity trees, Standards Australia | Contents list with nine lettered pruning types in two classes, plus palms, unacceptable practices and root pruning |
| European Tree Pruning Standard (ETPS), 2021, TeST working group | Five main pruning operations, then a matrix of eleven tree and objective cases |
| ISA Best Management Practices, Pruning, third edition (2019), item P1314 | Topic list: pruning systems, objectives, cuts, practices, poor practices, conifers, palms and bamboo, specifications, glossary |
AS 4373-2007
The contents list of AS 4373-2007, as shown by the NSAI standards shop, groups pruning into classes with a letter for each type. Crown maintenance holds deadwooding (D), crown thinning (T), selective pruning (S) and formative pruning of young trees (F). Crown modification holds reduction pruning (R), crown lifting (C), pollarding (P), remedial or restorative pruning (H) and line clearance (L). AS 4373 defines crown thinning in clause 3.16 and gives it class T in clause 7.2.3, while the European standard has no crown thinning operation.
Clause 8 lists unacceptable practices: lopping and topping, wound painting and flush cutting. The scope sets the standard for amenity trees, including palms. It leaves out timber, foliage, fruit and flower production, chemical pruning, topiary, espalier, hedging and pleaching. It also leaves out wildlife habitat and the safety of the tree worker. Standards Australia reconfirmed it on 25/09/2020, and it remains current in New Zealand.
The European Tree Pruning Standard
The European standard of 2021 names five main pruning operations. Structural pruning keeps tree height and crown shape unchanged. It acts on crown structure, for example by removing or reducing branches with weak forks, and the standard does not allow a change of tree height or a major change of crown shape. Lateral crown reduction works on the side or lower crown and does not alter height. Upper crown reduction treats the apical crown and is described as often irreversible. Crown shaping covers pollarding and trimming. Restorative pruning applies to trees badly affected by damage or by poor earlier work. Its pruning cycle ranges from 1 to 5 years, and the leaf area removed in general stays under 10% in mature, 20% in semi-mature and 30% in young trees. The standard calls upper crown reduction less common and links it to mechanical stabilisation of the tree or natural crown retrenchment. Pruning to a lateral, also called a head cut or reduction cut, leaves a living side branch, and the standard recommends one at least a third the diameter of the pruning wound.
Its matrix then pairs each operation with a tree type: young or semi-mature trees with a temporary crown, young trees with only a permanent crown, mature trees and veteran trees. Formative pruning of young trees, crown maintenance and two kinds of restorative pruning appear as matrix entries. In formative pruning the standard keeps a crown to stem ratio above 2:1 during crown raising, with 1:1 as the starting ratio for young trees. Formative pruning starts as soon as the tree is established, usually 3 years after planting at the latest. For crown maintenance, Table 1 of the standard limits deadwood removal to branches likely to cause damage or injury, for example over 5 cm in diameter and over 1 m long. Topping of a mature tree with no plan to set a fixed form is called bad tree work.
The standard also lists steps to complete before any operation: a tree condition assessment, defined objectives, an evaluation of the tree's ability to respond to wounds, and a check for conflicts with biodiversity and biosecurity rules. It carries a CC BY-ND 4.0 licence.
A300, BS 3998 and the ISA booklet
TCIA is secretariat for ANSI A300, and the standards have been a single consolidated document since January 1, 2024. TCIA says the parts are used to write specifications for work, not as specifications themselves, and that they do not apply to agriculture, horticultural production or silviculture, except where explicitly noted otherwise.
BSI describes BS 3998:2010 as a full revision with changes on safety of people and property, decision-making criteria, wildlife and habitats, and veteran trees. It considers the effect of work on one tree and its neighbours, and leaves out management of whole tree populations. Neither publisher prints the clause titles for pruning types on its page.
ISA calls its Pruning BMP, by Sharon J. Lilly, Edward F. Gilman and E. Thomas Smiley, a companion to the A300 standards. The 63-page booklet replaces the second edition of 2008 and explains pruning types and pruning cuts.
Related guides
The US, UK and Australian standards are mapped in the guide to pruning standards by country. The Australian and European type systems are compared term by term in the guide to pruning terms, and the European text has its own guide.
Sources
- Tree Care Industry Association, ANSI A300 Tree Care Standards, page dated November 18, 2025, read October 15, 2026
- TeST working group with the European Arboricultural Council, European Tree Pruning Standard, first edition, June 2021, read October 15, 2026
- British Standards Institution, BS 3998:2010 Tree work. Recommendations, product page, read October 15, 2026
- NSAI Standards, AS 4373-2007 Pruning of amenity trees, Standards Australia, scope and contents, read October 15, 2026
- International Society of Arboriculture, Best Management Practices: Pruning, third edition (2019), item P1314, read October 15, 2026