Rigger and signal person qualification: OSHA 1926.1425 and 1926.1428
OSHA's crane standard requires a qualified rigger for loads hooked or guided inside the fall zone and a documented, tested signal person. The same subpart excludes tree trimming and tree removal work from its scope.
Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here.
Scope of Subpart CC
Section 1926.1400 applies the subpart to power-operated equipment used in construction that can hoist, lower and horizontally move a suspended load. Its list of exclusions includes, at paragraph (c)(13), "tree trimming and tree removal work".
The same list also excludes machinery originally designed as vehicle-mounted aerial devices for lifting personnel, and digger derricks used for pole work covered by Subpart V.
Qualified rigger
Section 1926.1401 defines a qualified rigger as a rigger who meets the criteria for a qualified person. A qualified person has a recognized degree, certificate or professional standing, or has extensive knowledge, training and experience. That person has successfully demonstrated the ability to solve or resolve problems relating to the subject matter, the work or the project.
Section 1926.1425, "Keeping clear of the load", is where the term does its work. Hoisting routes that minimize employee exposure to hoisted loads must be used where available, to the extent consistent with public safety.
While the operator is not moving a suspended load, no employee must be in the fall zone, with three exceptions:
- employees hooking, unhooking or guiding a load;
- employees making the initial attachment of the load to a component or structure;
- employees operating a concrete hopper or concrete bucket.
Section 1926.1401 defines the fall zone as the area, including the area directly beneath the load, in which it is reasonably foreseeable that partially or completely suspended materials could fall in an accident.
Paragraph (c) sets three criteria for employees hooking, unhooking or guiding a load, or making its initial connection, inside the fall zone. The materials must be rigged to prevent unintentional displacement. Hooks must have self-closing latches or their equivalent, with "J" hooks permitted for setting wooden trusses. The materials must be rigged by a qualified rigger.
Paragraph (d) allows only the employees needed to receive a load inside the fall zone while it is landed. During a tilt-up or tilt-down operation, no employee must be directly under the load. Only employees who are needed for the operation are permitted in the fall zone. They physically guide the load, closely monitor it and give instructions, or attach or detach it. Each must be doing a job the employer can demonstrate is infeasible from outside the zone.
Signal person qualification
Section 1926.1428 puts the duty on the employer of the signal person. Each signal person must meet the qualification requirements before giving any signals, by one of two options.
| Option | What the section requires | Portability |
|---|---|---|
| Option 1, third party qualified evaluator | The signal person holds documentation from the evaluator showing the qualification requirements are met. | The section states no such limit |
| Option 2, employer's qualified evaluator | The employer's evaluator assesses the person, decides the requirements are met and documents that decision. | Not portable: other employers are not permitted to use it |
Section 1926.1401 defines the third party evaluator as an entity that, due to its independence and expertise, has demonstrated competence in accurately assessing whether individuals meet the signal person requirements. The employer's own evaluator is a person employed by the signal person's employer with the same demonstrated competence. The rule text names no testing organization.
The employer must keep the documentation at the site while the signal person works for that employer. It must list each type of signaling, such as hand signals or radio signals, for which the person qualifies. If the person's later actions show the requirements are not met, the employer must not let the person keep working as a signal person until re-training and a new assessment confirm it.
The five qualification requirements
- Know and understand the type of signals used. If hand signals are used, know the Standard Method, the protocol in appendix A of the subpart.
- Be competent in applying the type of signals used.
- Have a basic understanding of equipment operation and limitations, including the crane dynamics of swinging and stopping loads and boom deflection from hoisting loads.
- Know and understand the relevant requirements of sections 1926.1419 through 1926.1422 and 1926.1428.
- Demonstrate paragraphs (c)(1) through (4) through an oral or written test and a practical test.
Section 1926.1401 also uses the signal person rule for another role. A dedicated spotter watching the separation between a power line and the equipment, load line and load must meet the requirements of section 1926.1428.
OSHA fact sheets on both roles
OSHA's crane, derrick and hoist topic page lists two fact sheets dated October 2010, one on the qualified rigger and one on signal person qualification, under Subpart CC. Separate OSHA standards address crane, derrick and hoist hazards in general industry, maritime, gear certification and construction.
Sources
- US eCFR, 29 CFR 1926.1425 Keeping clear of the load, read October 19, 2026
- US eCFR, 29 CFR 1926.1428 Signal person qualifications, read October 19, 2026
- US eCFR, 29 CFR 1926.1401 Definitions, read October 19, 2026
- US eCFR, 29 CFR 1926.1400 Scope, read October 19, 2026
- OSHA, Crane, Derrick and Hoist Safety topic page, read October 19, 2026