ArbNation Join free

Safety committees and representatives: headcount rules in five jurisdictions

Ontario sets a worker safety representative from 6 workers and a committee from 20. Alberta starts at 5 and 20, British Columbia at 10 and 20. UK and Commonwealth Australian rules turn on a request.

Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here.

Headcount thresholds

Representative and committee triggers by jurisdiction
PlaceRepresentativeCommittee
Ontario6 to 19 regularly employed workers: one representative selected by the workers20 or more regularly employed workers
BCMore than 9 but fewer than 20 workers, employed for longer than a month20 or more workers, employed for longer than a month
Alberta5 to 19 regularly employed workers: a designated worker20 or more regularly employed workers
UKNo headcount in regulation 9When at least two safety representatives ask in writing
Australia (Cth)When a worker asks for an electionWhen a representative or 5 or more workers ask

Ontario

The Ontario Ministry of Labour guide to the Occupational Health and Safety Act gives three bands. Workplaces with 1 to 5 workers need neither a committee nor a representative. At 6 to 19 workers the Act calls for one representative, selected by the workers (subsection 8(1)). At 20 or more it calls for a joint health and safety committee (clause 9(2)(a)).

A designated substances regulation, a Director's order or a Minister's order can require a committee below 20 workers. Construction projects need a committee when 20 or more workers are regularly employed and the project is expected to last three months or more.

The committee has at least two members under 50 workers and at least four from 50. At least half must be workers who do not exercise managerial functions. Two co-chairs lead it, one chosen by each side, and members meet at least once every three months.

British Columbia

WorkSafeBC sets a joint committee at 20 or more workers employed at the workplace for longer than a month. WorkSafeBC may also order a committee in any other workplace. With more than 9 but fewer than 20 workers, which includes 10 or more employed for longer than a month, the workplace needs a worker health and safety representative.

The representative has the same duties and functions as a committee, to the extent practicable. Committee members selected on or after April 3, 2017 receive eight hours of training, representatives four hours. Both are entitled to eight hours of leave a year for training. Section 3.26 of the Regulation requires a written annual evaluation to determine the effectiveness of the joint committee.

Alberta

Section 13 of the Occupational Health and Safety Act requires an employer who regularly employs 20 or more workers to establish a joint health and safety committee. Section 14 requires an employer with 5 to 19 regularly employed workers to designate a worker, not associated with management, as the health and safety representative. A Director can designate a work site under either section.

An employer that must designate a representative may set up a committee instead (subsection 14(6)). Employer members cannot outnumber worker members. At a work site with 20 or more regularly employed workers across two or more employers, the employers coordinate one committee. That does not apply where a prime contractor has been designated.

The Government of Alberta bulletin LI060 adds that the OHS Regulation leaves unwaged workers (volunteers) out of the count of regularly employed workers.

United Kingdom

Regulation 9 of the Safety Representatives and Safety Committees Regulations 1977 prescribes the cases in which an employer sets up a safety committee. The case is any in which at least two safety representatives ask the employer in writing. The regulation sets no workforce size.

The employer consults those representatives and the recognised trade union representatives whose members work in the workplaces concerned. A notice stating the committee's composition and the workplaces it covers is posted where employees can easily read it. The committee is established no later than three months after the request.

Australia

The Commonwealth Work Health and Safety Act 2011 (compilation of July 1, 2024) sets no minimum workforce size. Under section 50 a worker can ask the person conducting the business or undertaking to facilitate an election for one or more health and safety representatives. Section 51 then calls for work groups to be determined.

Under section 75 the business must establish a health and safety committee within 2 months of a request from a representative for a work group, or from 5 or more workers at the workplace. It may also establish one on its own initiative. Under section 76 at least half of the members must be workers not nominated by the business.

The Act is the Commonwealth's. State and territory laws are separate and are not reported here.

Sources