ArbNation Join free

Tractor-mounted equipment and PTO shaft guarding in tree work

OSHA 1928.57 requires a master shield on the tractor PTO and guards on PTO-driven equipment. HSE leaflet AIS40 puts a 120 kg load figure on the tractor PTO shield and a 50 mm overlap on the guards.

Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The US text is 29 CFR 1928.57, which covers guarding of farm field equipment. The UK texts are HSE leaflet AIS40 on power take-offs and the HSE leaflet on mobile stump grinders. SafeWork NSW names PTO shafts as a priority on its machine guarding page.

OSHA 29 CFR 1928.57

The section protects employees from moving machinery parts on farm field equipment, farmstead equipment and cotton gins used in agricultural operations. Farm field equipment means tractors or implements, including self-propelled ones, used in agricultural operations. The section took effect on October 25, 1976. Some paragraphs do not apply to equipment made before that date.

The definitions section puts power take-off shafts as the shafts and knuckles between the tractor, or other power source, and the first gear set, pulley, sprocket or other component on the driven equipment.

  • All PTO shafts, whether rear, mid- or side-mounted, are guarded by a master shield or by other protective guarding.
  • Tractors are equipped with an agricultural tractor master shield on the rear PTO, with exceptions the paragraph lists. The shield is strong enough to resist permanent deformation when a 250 pound operator uses it as a step.
  • PTO-driven equipment is guarded against contact with positively driven rotating members. If the equipment needs the master shield removed, it also protects against the part of the tractor PTO shaft that sticks out.
  • Signs on tractors and PTO-driven equipment state that power drive system safety shields must be kept in place.

Guards are designed and located to protect against inadvertent contact, and each guard and its supports can withstand the force of a 250 pound person leaning on or falling against it. Servicing, adjusting, cleaning or unclogging calls for the engine stopped, the power source disconnected and all movement stopped, with a narrow exception. Employers instruct each employee on safe operation at initial assignment and at least annually after that.

HSE leaflet AIS40

HSE states that a tractor PTO and the drive shaft of a machine are very dangerous if used unguarded, and that people are killed or seriously injured by them every year. The leaflet is aimed at all users of PTO-driven equipment. It also notes that broken, damaged or badly fitting guards can be as dangerous as none.

PartAIS40 wording
Tractor PTO shieldCovers the top and both sides of the PTO. Built to support a downward load of at least 120 kg. A fixed cap may cover the PTO when it is not in use
Drive shaft guardEncloses the shaft along its full length, from the tractor to the first bearing on the machine. Design guidance is in BS EN 12965:2003+A2:2009
Guard tubesSlightly shorter than the telescopic halves of the drive shaft, by not more than 25 mm
Restraining deviceA rope or chain stops the guard rotating with the shaft. It is not used to support the shaft when the machine is uncoupled
OverlapThe tractor PTO shield and the power input connection guard overlap the shaft guard by at least 50 mm
Replacement guardsSold individually, they are CE marked and come with a Declaration of Conformity, unless sold as an identical spare from the original manufacturer
Torque limiters, free wheels, clutchesPlaced at the power input connection, the machine end of the shaft

The leaflet lists guard checks daily when in use for wear and damage, and states that damaged guards must be replaced before use. On dual-speed PTOs, the 540 rpm shaft has six splines and the 1000 rpm shaft has 21. It calls an adaptor that lets a six-spline shaft drive 1000 rpm machines potentially dangerous, and not recommended. Its safe-stop list covers hand brake on, controls in neutral, engine off, key removed and waiting for all movement to cease.

HSE on stump grinders

HSE leaflet AFAG606 on mobile stump grinders covers a tree-work machine. For a grinder driven by a PTO shaft, the shaft guard complies with BS EN ISO 5674, encloses the shaft along its full length from tractor to machine, is correctly fitted and works. The PTO speed also suits the machine.

SafeWork NSW machine guarding

SafeWork NSW lists PTO shafts, auger intakes, harvesting machinery and post drivers as a major cause of harm and injury on farms. It says it will use its powers to require PTO shafts and intake augers to be adequately guarded, and rollover protection structures to be fitted to tractors and other mobile plant.

Sources