ArbNation Join free

Tree protection fencing and ground protection: the specifications councils and standards describe

Toronto's tree by-laws require protective barriers built to the General Manager's specification, and a permit is needed if it cannot be met. Belfast's guidance names fencing and ground protection too, and the A300 Part 5 and BS 5837 standards cover tree protection on sites.

Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.

The named by-laws, council guidance and standards are described here as published. It is not training and does not teach the work.

Scope of A300 Part 5 and BS 5837

The Tree Care Industry Association describes ANSI A300 Part 5 as the part that applies to management of trees during site planning, development and construction. Its page lists the phases from planning to post-construction. It also lists the protection topics in the part: barriers, demolition, disposal of building waste, fill soil and grade change, excavation and trenching, utilities, and pavement.

BSI describes BS 5837:2012, Trees in relation to design, demolition and construction, as recommendations that put tree care at the heart of a construction project. The standard is relevant to arboriculturists, architects, builders, landscape architects, land managers, contractors and statutory undertakers. BSI says its recommendations can apply whether or not planning permission is required. The catalogue page does not print the clauses on barriers.

Toronto: barriers set by specification

A May 17, 2018 report from Toronto's General Manager of Parks, Forestry and Recreation answered a request to make tree protection fencing structurally secure so it cannot be easily moved. The report found that the Tree By-laws, Municipal Code Chapter 813, do not prescribe the details of barriers. They give the General Manager authority to set minimum requirements in the City's Tree Protection Policy and Specifications for Construction Near Trees, last updated in 2016.

Section 813-21 requires barriers to go up to that specification before any work starts on the site. It prohibits altering, moving or removing them unless authorized. Where the specification cannot be met, a permit to injure the tree is required. Construction applications must include a Tree Protection Plan showing the barrier locations, prepared with or in consultation with an arborist when protected trees are near the work.

By-law No. 248-2013 amended Chapter 813 and the ravine chapter, 658. For trees on City streets, it adds a tree protection plan to the permit application where the General Manager requires one. That plan identifies the location, species and size of trees and illustrates protection measures including protective barriers and hoarding. Permit conditions include compliance with the Specifications and with the approved tree protection plan. The General Manager may also require a tree protection guarantee as a letter of credit or other security. The amount represents the appraised tree value, removal costs and replacement costs, and the City releases it once construction is complete and compliance is confirmed to the General Manager's satisfaction.

The by-law sets penalties on conviction of a minimum fine of CA$500 and a maximum of CA$100,000 per tree. A special fine of CA$100,000 applies under the City of Toronto Act, 2006.

Belfast: fencing and ground protection in planning guidance

Belfast City Council's Trees and Development guidance, published May 2023, is non-statutory Supplementary Planning Guidance. It lists tree protection during construction among site design considerations: access, tree protection fencing, ground protection (ground guards, geocell), levels, underground apparatus and storage areas.

The guidance names the documents a site with trees may need.

  • A tree survey that categorises trees under BS 5837:2012 as A, B, C or U and records the root protection area from trunk diameter at 1.5 m above ground.
  • A tree protection plan showing trees for retention and removal, the precise location of protective fencing, and the extent and type of ground protection.
  • An arboricultural impact assessment and an arboricultural method statement.

Its examples of good protection are a strong fence around the edge of the root protection area, with the area inside treated as sacrosanct during works, and ground protection used temporarily or long term to avoid compaction. It lists typical damage as root loss from strip excavation, compaction from driving or storing materials, suffocation from added fill, drought stress or drowning from changed drainage, and bark injury from vehicles. Its design ideas include hand tools or air tools for excavation in the root protection area, a supervising arboriculturist, and soil mounds stored on heavy-duty plywood or ground guards.

Related pages cover tree protection plan drawings and ground protection over roots during works.

Sources