ArbNation Join free

Urban soils compared with woodland soils: fill, compaction, high pH and contamination

USDA NRCS describes urban soil as moved, filled, compacted and variable over short distances, with alkaline pockets near concrete and possible lead near the surface. Long-vegetated parks and urban forests can hold more organic matter than a site just built on.

Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.

Urban soil is not one soil. The USDA Natural Resources Conservation Service (NRCS) places urban soils on a continuum, from essentially native soil to soil highly altered by people. NRCS says site history and management often play an overarching role in where a given site sits on that line.

Where urban soils start from

NRCS Technical Note 470-02 (January 2024) says sites with long-term vegetation, such as parks and urban forests, may show high organic matter and well-developed soil structure. Sites with recent construction or demolition may be compacted and lack a topsoil layer. The same note says carbon-rich urban soils form where perennial vegetation has been managed for a long time, organic amendments have been added and topsoil has not been removed. Its examples are parks, urban forests, cemeteries and gardens.

The note also describes human-altered and human-transported soils (HAHT). These are soils heavily modified by people, usually to carry buildings and roads. Their profiles can hold fill, imported topsoil, gravel, coal ash, slag, brick and cement-building materials. NRCS adds that many HAHT soils still support ecological functions.

The U.S. Environmental Protection Agency (EPA) describes an urban soil as one that has been moved, graded or compacted over time, often by construction and demolition. As low areas are filled and hills are graded, the profile is mixed or laid down in a different order. Fill often comes from nearby and differs from the native soil on the site. UF/IFAS fact sheet MG456 quotes a 1974 definition: a nonagricultural, manmade surface layer more than 50 centimeters (20 inches) thick, produced by mixing, filling or contamination.

Properties NRCS lists for urban soils

Properties of urban soils, USDA NRCS Technical Note 470-02, Table 1
PropertyWhat NRCS records
Parent materialMany urban soils are formed from human-transported material such as fill, in all or part of the profile
Coarse fragmentsHigh concentrations are common
HorizonsHomogenized, truncated or weakly developed. Some lack an A horizon or topsoil
Spatial variabilityHigh, both across the site and with depth. Properties can change a lot over short distances
Heavy metals and organic compoundsIncreased potential for contamination
NutrientsVariable. Low in soil never used for gardening
pHVariable. Alkaline where cement-based building material has been mixed in
Organic matter and carbonVariable, from extremely high to very low, depending on site management history

Fill and layering

The University of Florida (UF/IFAS) fact sheet SL391 describes house lots where fill sand is spread over the native soil and buries the topsoil. The fill has low organic matter and nitrogen, a wide range of phosphorus and other nutrients, and low water-holding capacity. Sand or topsoil may then be added over the fill, so the profile is mixed and layered. In parts of Florida, dredged material from stormwater ponds is also used as fill. UF/IFAS says its high clay content drains badly, compacts easily and leads to waterlogging and root rot.

UF/IFAS adds that a thin layer of topsoil is often applied over fill during final grading to help plants establish, but the problems underneath remain. It also lists construction debris in the soil: wire, wood, nails, asphalt paper and concrete shards, which can restrict root development.

Compaction

NRCS defines compaction as pore space squeezed out of the soil. It inhibits water infiltration, root growth and microbial activity. NRCS says it can occur quickly and is a particular concern when soils are wet. Vehicles and concentrated foot traffic cause it, including cars parked on lawns. NRCS Urban Technical Note 2 (March 2000) lists the construction causes: compacting whole areas for paving and foundations, heavy equipment on road banks and slopes, and grading lots with sod laid on hard or topsoil-stripped ground.

Technical Note 2 adds that urban compaction can be more permanent than on farmland, because equipment is hard to bring in and loosening the soil is hard around perennial plants, utilities, buildings and driveways. It puts compaction mostly in the top 12 inches. The EPA puts most urban compaction problems in the top 12 to 24 inches, the root zone of most plants, and reports that deeper layers are often less compacted.

Forest Research in the United Kingdom lists compaction around street trees from construction work. Compacted soil has less pore space and a poor structure that restricts roots. It causes waterlogging in wet periods and drought in dry ones, and Forest Research says poor rooting can also raise the risk of trees blowing over in storms. Bulk density limits for roots are in the table of root-limiting bulk densities.

High pH

NRCS says alkaline soil pH, which can come from coarse fragments of cement-based building material, presents challenges for plant growth and nutrient availability. UF/IFAS reports higher pH near masonry walls and foundations from lime and concrete residue, and pockets of high pH where concrete is buried elsewhere. Plants that need acidic soil have trouble establishing there, and UF/IFAS describes yellowing of upper leaves like an iron deficiency. It also notes that irrigation water tends to have a high pH and raises soil pH gradually. Liming and acidifying are covered in soil pH around trees.

Contamination and unsuitable material

NRCS names lead, cadmium, polycyclic aromatic hydrocarbons and petrochemicals as the main chemical concerns. They trace to past industrial use, to industrial products and to air deposition near industry. Lead is common in urban soils, especially at or near the surface, and the main risk is swallowing soil. NRCS cites studies in which soil lead rose with population density, higher toward city centres. It also lists road salt among sources of salt concentration.

The EPA ties contamination to site history. In industrial areas it lists heavy metals, hydrocarbons and manufacturing chemicals. In residential areas built before the early 1980s it lists lead paint residue and says they may also hold asbestos, coal and wood ash, fuel oil, used motor oil and pesticides. Remains of old septic systems, cisterns and wells are often found during redevelopment. Residential areas tend to have less compaction and better soil than heavily urbanized ones.

NRCS also records sites where rubble or dumped material dominates the surface, and sealed soil under asphalt, which it calls a severe form of land degradation. For gardens, it notes raised garden beds with imported soil are a common way to manage those sites.

What soil studies of urban sites find

EPA Publication 905R11003 reports that urban soil studies find compaction, low organic matter and low levels of contamination common. Its field assessment looks for poor growth at the surface and a lack of roots or biological activity in the profile, and a soil test for pH, organic matter, nutrients, micronutrients and metals including lead. Testing is covered in soil testing for trees.

Sources