ArbNation Join free

European Tree Cabling and Bracing Standard (TeST, 2022): scope and contents

EAS 02:2022 is the first edition of the European Tree Cabling/Bracing Standard, issued in August 2022 by the TeST working group under CC BY-ND 4.0. Its six chapters run from scope and methods to inspection and site management.

Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The standard is described by its scope and contents only. It is not training and does not teach the work. The European Arboricultural Standards site gives its address as the Arboricultural Academy (Arboristická akademie ZO ČSOP), Sokolská 1095, Kolín II, Czechia.

Who issued it and under what licence

The standard's front matter gives its code as EAS 02:2022 and its date as August 2022, first edition. The text comes from the working group Technical Standards in Treework, known as TeST, in cooperation with the European Arboricultural Council (EAC). The copyright line names the working group, and the licence is Attribution-NoDerivatives 4.0 International (CC BY-ND 4.0). The front matter states that translations are welcome and points translators to the project leader.

The Italian edition lists fifteen authors from the Czech Republic, Germany, Belgium, Poland, Italy, the Netherlands, Spain, Latvia, Lithuania, Slovakia and Croatia. Jaroslav Kolařík of the Czech Republic is the team coordinator. Two reviewers from the United Kingdom revised the text. Its preface says 11 European countries took part in the project.

The TeST project behind it

The Arboricultural Association describes TeST as an EU-funded three-year project that began in September 2019. Its aim was standards at European level for tree pruning, planting and stabilisation methods covering cabling, bracing and propping. The European Arboricultural Standards site gives its run as September 2019 to August 2022, with a partnership of 11 European countries. The standards harmonise formal and informal national norms, and a draft goes to public consultation before publication.

TeST rests on the earlier European Tree Pruning Standard pilot, which the Association says involved arborists from 12 countries. It produced three standards: tree pruning, tree planting and tree cabling and bracing. Each comes with national annexes that carry national legislation and accepted national practice. The Association's 2022 article says the 12 represented countries each prepared one for every standard.

A second project, European Consulting Standards (ECoST), runs from February 2022 to February 2025 and covers tree assessment, tree valuation and tree protection on construction sites. In 2025 the Association reported all six standards published, the pruning standard revised and republished in February 2025, and a revision of the planting standard planned for early 2026.

Chapters of the cabling and bracing standard

Contents as listed in the Italian edition
ChapterSections
1. Objective and contentsScope, main objectives, plant health protection
2. Normative referencesProfessional qualification, general safety requirements
3. MethodsWork on the target, stabilisation by pruning, dynamic systems, static systems, rigid static bracing, propping, rare or historic systems (compression bands, lashing, tree linking)
4. Description of methodsGeometry of connections, installation height, cable angle, dynamic crown systems, static crown systems
5. Records, inspection, maintenance, reinstallationRegistration, routine inspection, detailed inspection, replacement
6. Site managementImpact on soils, impact on nearby trees

The standard states its aim as presenting the common techniques, procedures and requirements for stabilising ornamental trees, with public safety kept alongside the integrity of the tree. It marks its own wording: may for options, should for recommendations and must for mandatory actions. It describes itself as complementary to other EU standards and to national and regional rules, and it lists the qualifications recognised within the EU, among them the European Tree Worker, the ISA Certified Arborist and VETcert at operational level.

Inspection and records in the text

Chapter 5 sets a routine visual inspection at least once a year, with extra checks after severe events such as strong wind. It places the routine check at ground level, usually with binoculars, in the dormant season. A detailed aerial inspection, done on the maker's instructions, comes at least every 5 years. The installer's or the visual inspector's instructions may set a shorter interval, and the shorter one applies.

The records chapter lists what is kept after installation. The list covers tree location, installation date, the reason and the installer's contact. It adds the proposed inspection date, the system type and the installation height. The last items are the maker and model, the rated load capacity, the number of systems and the maximum service life. Replacement triggers are the maker's maximum life, damaged parts under load, a major change in the tree, failure of a significant part of the tree, and overload of the system. The TeST team also built a free app, SDSTrees, for registering and checking installed systems.

Beside British and American standards

The Arboricultural Association writes that the European standards do not map directly onto existing British Standards. They overlap in places, cover some points the British Standards omit, and omit some points the British Standards cover. The Association was invited to edit the English text and is developing UK national annexes. It has also set up a review panel for BS 3998:2010 on tree work. For the American supplemental support systems standard, see the guide to ANSI A300 Part 3. Cabling methods are compared in the guide to cabling and bracing trees.

Sources