Soil test reports for tree sites: what labs list and which university labs take mailed samples
The university soil labs in Virginia and Tennessee take mailed samples and report pH, nutrients, lime need and sometimes soluble salts. Virginia Tech's form has a tree and shrub crop code and asks for a composite from the trunk out to the branch tips.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
Virginia Tech, the University of Tennessee and North Dakota State University (NDSU) publish soil sampling instructions and lab report formats. Penn State and Cornell list their labs and services. Lab fees change, so each lab's own price source is linked below and no price is quoted here.
Routine report contents
Virginia Tech's routine test for lawns, gardens, fruits and ornamentals reports soil pH, phosphorus, potassium, calcium, magnesium, zinc, manganese, copper, iron, boron and an estimated cation exchange capacity (CEC). Organic matter and soluble salts are separate add-on tests. The form carries a plant code list, and a recommendation needs a code. Code 246 is trees such as pine, maple and oak, and code 245 is non-acid-loving shrubs such as lilac, forsythia and boxwood. Acid-loving shrubs such as azaleas, camellias and rhododendrons have codes 240 to 244. The form also asks for the months since the last lime application and the pounds per 1,000 sq ft used.
The University of Tennessee Extension agent's column describes a standard test that rates phosphorus and potassium as low, medium, high or very high and recommends a nitrogen amount. It says nitrogen itself is never tested, because it keeps moving between air, soil and plants. Calcium, magnesium, zinc, manganese, iron, copper, organic matter and soluble salts cost extra. The column also says a test is crop specific, and that results take about a week and a half.
What the numbers mean
NDSU's H1824 explains the report fields for turfgrass, but its definitions apply to any soil report. It is a turf publication, not a tree one.
- pH: the scale runs 0 to 14 and is logarithmic, so pH 8.0 is 10 times more alkaline than pH 7.0 and pH 9.0 is 100 times. NDSU gives 6.5 as the ideal for most turfgrasses.
- Organic matter: reported as a percent of the soil. NDSU gives 2 to 4 percent as the ideal for turf. A thatch layer left in the sample gives a falsely high reading.
- Phosphorus and potassium: reported in parts per million. NDSU uses the Olsen method for phosphorus because it is more accurate for alkaline soils.
- Soluble salts: reported as electrical conductivity (EC) in millimhos per centimeter, where a higher number means more salt. NDSU lists EC thresholds by turfgrass species, from below 3 for annual bluegrass up to 4 to 8 for tall fescue.
NDSU also describes a home check for calcium carbonate when pH is 7.5 or higher: add about a tablespoon of soil to 2 tablespoons of vinegar and listen for fizzing. Fizzing means high calcium carbonate, and NDSU advises against a sulfur amendment in that case.
Sampling instructions
| Publication | Instructions |
|---|---|
| Virginia Tech, Publication 452-125 | For shrubs and trees, pick an area from the trunk to the outer edges of the branches. Take at least 10 slices per sampling area from the top of the ground to 4 inches for lawns, scraping off surface mat and litter. Mix them in a clean bucket and fill the lab's sample box. Do not sample when the soil is extremely wet. Separate samples for areas that differ in soil or past fertilizer and lime |
| University of Tennessee Extension | A composite from about 10 locations. For lawns and gardens, 8 to 10 locations. Problem spots and areas of contrasting soil are sampled separately. Soil should be neither too moist nor too dry. Remove debris and rocks before sampling |
| NDSU H1824 (turf) | Cores from the upper 4 to 6 inches, excluding thatch. 7 to 10 random cores per area for homeowners and 15 to 20 for professional turf managers. At least 1 pint of mixed soil per area. Avoid dog urine spots and fertilizer spills |
Virginia Tech's sheet warns that each sample stands for many tons of soil and that results cannot be more accurate than the sample.
University labs that take samples
- Virginia Tech Soil Testing Laboratory: takes samples with the printed sample information sheet, and it sends results by email only. The information sheet prints the test fees, with separate in-state and out-of-state columns.
- University of Tennessee Extension Soil Testing Lab, Nashville: samples go in a taped box by priority mail, with the fee and information sheet mailed separately, as the Grainger County extension column explains. The county office hands out boxes and sheets.
- Penn State Agricultural Analytical Services Laboratory: open to the public on a fee basis for soils, water, plant tissue, manure, compost and other materials. Its lab page lists the soil fertility and environmental soil tests.
- Cornell Soil Health Laboratory: runs the CASH soil health assessment, which adds biological and physical measures to nutrient analysis, and names landscape managers among its users. Details sit on the Cornell Soil Health site.
Sampling depth and timing for trees sit with the soil testing guide, and pH ranges with the pH and nutrient guide.
Sources
- Virginia Tech Soil Testing Laboratory, Soil Sample Information Sheet for Home Lawns, Gardens, Fruits, and Ornamentals, Publication 452-125, revised 2021, read October 16, 2026
- Penn State College of Agricultural Sciences, Agricultural Analytical Services Laboratory, read October 16, 2026
- Cornell University, Cornell Soil Health Laboratory and Program, read October 16, 2026
- North Dakota State University Extension, Interpreting the NDSU Soil Test Analysis for Managing Turfgrass, H1824, revised April 2023, read October 16, 2026
- University of Tennessee Extension, Grainger County (Carver), Extension Talk: Soil Testing, read October 16, 2026