ArbNation Join free

Standards register addendum: ASTM F1506, F711, F1505 and D120 for electrical work

Four ASTM Committee F18 standards cover arc-rated clothing (F1506), live line tool rods (F711), insulated hand tools (F1505) and rubber insulating gloves (D120). Three of the four catalogue pages show a newer edition than the one listed.

Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. All four standards belong to ASTM Committee F18 on electrical protective equipment for workers and sit in volume 10.03 of the ASTM book of standards. Other equipment standards are in the US equipment and electrical addendum.

The four ASTM pages at a glance
StandardEdition and page statusVersion list
F1506, arc-rated clothingF1506-22, marked Historical, last updated December 2, 2025F1506-25 marked Active
D120, rubber insulating glovesD120-22, marked Active, last updated March 8, 2022No newer edition
F711, FRP rod and tube for live line toolsF711-02 (2007), marked Historical, last updated December 4, 2013F711-26 marked Active
F1505, insulated and insulating hand toolsF1505-16, marked Historical, last updated October 22, 2021F1505-16R26 marked Active

ASTM F1506, flame resistant and electric arc rated protective clothing

The title is Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs. Scope 1.1 sets minimum performance requirements to determine five things:

  • the arc rating of fabrics
  • the flame resistance of fabrics and subassemblies
  • the mechanical durability of the fabrics and subassemblies
  • the minimum garment construction and performance requirements
  • the garment labelling requirements for the completed clothing

The labelling rules exist so end users get enough information to pick a garment with the right arc rating. Scope 1.1.2 puts the hazard assessment on the end user, and 1.1.2.1 puts that risk assessment outside the standard. The abstract names the fabric properties tested: colorfastness, initial flammability, flammability after 25 washes or dry-cleanings (char length and afterflame time), and arc test rating.

The scope also lists what the standard leaves to others. Coated or laminated rainwear is in Specification F1891. Hand protection is in OSHA 1910.138, Specification D120 and Test Method F2675/F2675M. Laundering is in Guides F1449 and F2757. The standard also warns against using it to appraise fire hazard or fire risk under actual fire conditions.

ASTM D120, rubber insulating gloves

D120 covers the manufacturing and testing of rubber insulating gloves for protection of workers from electrical shock. It names two types: Type I, non-resistant to ozone, and Type II, resistant to ozone. Six classes differ in electrical characteristics: Class 00, 0, 1, 2, 3 and 4.

The abstract lists the tests: ac proof, ac breakdown, ac moisture absorption and proof, dc proof, dc breakdown, ozone resistance, chemical, tensile strength, tear resistance and puncture resistance. SI units are the standard in D120, and inch-pound figures in parentheses are for information only.

ASTM F711, fiberglass-reinforced plastic rod and tube for live line tools

F711 covers insulating rods and foam-filled tubes made from fiberglass-reinforced plastic (FRP) that are intended for live line tools. Scope 1.2 leaves out insulating rods and tubes made of other materials, and the fittings and attachments used on complete tools. Scope 1.3 says the specification sets the technical characteristics the rods and tubes must meet.

The rods and tubes go through four kinds of test: design, sample, routine and acceptance. The tests assess wicking, bending deflection, horizontal crush, tension, shear, compression, modulus of elasticity, mechanical aging, and dielectric current and leakage.

ASTM F1505, insulated and insulating hand tools

F1505 covers testing of insulated and insulating hand tools used on, or close to, energized electrical apparatus or conductors operating at a maximum of 1000 V ac or 1500 V dc. The abstract names the tools: screwdrivers, wrenches, pliers, nippers, strippers, cable cutting tools, cable scissors, knives and tweezers.

The tests are visual and dimensional checks, impact tests at ambient and extreme low temperature, dielectric tests, indentation tests, adhesion tests for insulating coatings, flame resistance tests and mechanical bending, torque and locking tests. The abstract also covers routine tests, acceptance criteria and a quality assurance plan. Scope 1.2 puts the specific use of the tools outside the standard, and 1.5 says it does not address all the safety problems of working on or near energized apparatus.

How crews work near energised lines is covered in the guide to insulated tools and aerial devices near energised lines.

Sources